:: Search Products ::

MANC - Manual Tank Changeover Valve Assembly for High Pressure

MANC

MANC - Manual Tank Changeover Valve Assembly for High Pressure with two 24" high pressure thermoplastic hoses and RED Acme Type-One wrench-less tank connectors with back flow prevention.

This assembly will screw into ANY high pressure or low pressure propane regulator. Valve is (2) 1/4" ID female inverted flare x 1/4" Male NPT.

POL's propane tank connectors instead of the Red Acmes are available, choose on the drop-down menu as MANC-POL

How does a Manual Tank Changeover Valve Assembly work?
The changeover valve will assemble into any high pressure or low pressure propane regulator. Using two propane tanks and one tank goes empty, just turn the yellow lever to the full tank. Close the tank valve and unscrew that Red Acme now you are free to remove the empty tank for replacement. A simple solution when running out of gas at the wrong time.

We offer free shipping to 48 U.S. States. Wt. 2#.

MANC
MANC Installed on a
COM3 High Pressure Regulator.
MANC with POL's

$199.95

Manual Tank Changeover Valve Assembly for High Pressure

MANC - Manual Tank Changeover Valve Assembly for Low Pressure

MANC

MANC - Manual Tank Changeover Valve Assembly for Low Pressure with two 24" high pressure thermoplastic hoses and Green Acme Type-One wrench-less tank connectors with back flow prevention.

(POL tank connectors instead of the Green Acmes are available.)

This assembly will screw into ANY low pressure propane regulator.
Valve is (2) 1/4" ID female inverted flare x 1/4" Male NPT

How does a Manual Tank Changeover Valve Assembly work?
The changeover valve will assemble into any low pressure propane regulator. Using two propane tanks and one tank goes empty, just turn the yellow lever to the full tank. Close the tank valve and unscrew that Green Acme now you are free to remove the empty tank for replacement. A simple solution when running out of gas at the wrong time.

We offer free shipping to 48 U.S. States. Wt. 2#.

MANC with POL's
MANC attached to a
COM5 Low Pressure Regulator
MANC Assembly ready
for attaching to a regulator

$199.95

MANC Manual Changeover Valve Assembly on a Low Pressure Propane Regulator

TS9413 - Twin Stage (Dual Stage) Low Pressure Regulator NEW DESIGN

TS9413

TS9413 - Twin Stage (Dual Stage) Low Pressure Regulator, 11" WC.
Gas Inlet is 1/4" Female NPT and the Gas Outlet is 3/4" Female NPT.

950,000 Btu/hr Maximum Output.

Popular regulator for Food Trucks, Generators, Heaters, and more.

Includes a High Pressure Inlet Hose with the length of your choice with
a Full Flow POL tank fitting. Gas Oulet 3/4" Female NPT.

The TS9413 is a combination of the First and Second stage regulators into a single unit. Starts with the First Stage which its preset at 10 PSI then it reduces down to the Second Stage which its preset at 11" WC but have an ajustment from 9" to 13" WC. It's equipped with a built-in 1/8" Female NPT tap for a pressure gauge on the Inlet and Outlet.

We offer free shipping to 48 U.S. States. Wt. 4#. (with a 5 ft hose).

TS9413 with OPTIONAL MANC Manual Propane Tank Changeover Valve with
Red Acmes or POLs to avoid running out of gas

Add a MANC Valve Assembly to your shopping cart.

$299.95

TS9413 Twin Stage (Dual Stage) Low Pressure Regulator set at 11" WC includes a High Pressure hose with a Full Flow POL tank connector. 950,000 btu/hr Maximum Output with a 3/4 Outlet

LPCAST10 - 10" Neck Cast Iron Low Pressure Propane or Natural Gas Burner

LPCAST10

LPCAST10 - 10" Diameter Burner Head with 10" Neck Cast Iron
Low Pressure Propane or Natural Gas Burner. (100,000 BTU/hr)

● The burner head has (4) 8mm mounting bolts to the sides of the burner.
● From the edge of the air inlet to the center of the burner is 10".
● From the orifice to the center of the burner is 11".
● The total length of the burner with an orifice is 17".
● The diameter of the burner head is 10" and the height is 5".
● We recommend a distance of 2" from burner to the bottom of pot.

● Provides a maximum output of 100,000 BTU/hr
● Proprietary cast mold designed for consistent high performance.
● Includes a 90° 3/8" flare Orifice, air shutter, and Insect Screen Guard
Or by request a 180° 3/8" flare orifice fitting is also available.

Optional Accesories:

● We recommend our Regulator COM5 for low pressure propane
● We recommend our natural gas hoses for a natural gas set up.
● The G-CVO Needle Control Valve Orifice.
● Also our G-PILOT Assembly.

We offer free shipping to 48 U.S. States. Wt. 14#.

LPCAST10 with Optional CVO Needle Valve Orifice
Bottom view of the LPCAST10

$149.95

10in Diameter Burner Head with 10in Neck Cast Iron Low Pressure Propane or Natural Gas Burner

MWEED - 24", 36" and 48" Magnum Head Propane Weed Burner, 500,000 btu/hr High Output Garden & Snow Melting Torch

MWEED

MWEED - 24", 36", 48" Magnum Head Propane Weed Burner, 500,000 btu/hr High Output Garden & Snow Melting Torch with adjustable handle and needle valve flame control

Why would I need a Magnum Head Weed Burner?

The Standard burner head is (2 1/2" x 2 1/2" head) and the Magnum burner head (3" x 3" head) weed burner. The Magnum burner puts out 50% more flame and is preferred by many operators working on large scale weed removal, working with roofing tar, or working melting snow. Some BBQ Cookers prefer the use of a Magnum Weed Burner to get their logs started. We recommend use of this unit with an optional COM1 High Pressure Regulator with Ten foot hose. (See it at the bottom of the page).

We offer free shipping to 48 U.S. States.

24", 36", 48" Magnum Weed Burners
Magnum (Top) and Standard Weed Burners
Standard and Magnum Weed Burners
24", 36", 48" Magnum Weed Burners
Magnum and Standard Weed Burner Performance

$79.95

MWEED - 24", 36" and 48" Magnum Head Propane Weed Burner