LPVALVE - Gas Control Valve 

►  Gas inlet is the normal 3/8" Male SAE Gas Flare #56 orifice.
        The end to screw into the burner venturi is 1/8" or 1/4" Male NPT.
    

►  To be use with a High or Low Pressure Propane or Natural Gas Burners.
     

►  To order larger quantities. Call 713.222.0077

10 to 24 pcs = $5.00 ea. 25 to 99 = $4.00 ea. 100 or more = $3.00 ea.

Wt. 2oz.   Free shipping of any quantity to the 48 contiguous U.S. States.

                    
      Examples of LPVALVE with Burners                         1/4" Male NPT

Almost Gone... Few in Stock

HPB6 - 6" Neck Cast Iron High Pressure Burner. (160,000 BTU/hr)

●  The burner has a 10mm in diameter Center Bolt.
●  From the edge of the air inlet to the center bolt the burner is 6 1/4".
●  From the orifice to the center bolt is 7 1/2".
●  The total length of the burner with an orifice is 10".
●  The diameter of the burner head is 4" and the height is 3".
●  We recommend a distance of 3" to 4" from burner to the bottom of pot.

●  Provides a maximum output of 160,000 BTU/hr.
●  Includes a 90° 3/8" flare Orifice, air shutter, and Insect ScreenGuard.
    Or by request a 180° 3/8" flare orifice fitting is also available.


Optional Accesories:

●  We recommend our Regulator COM3.
●  The G-CVO Needle Control Valve Orifice.
●  Also our G-PILOT Assembly.


We offer free shipping to 48 U.S. States. Wt. 3#.
 

                                             HPGX-2 with Optional G-PILOT Assembly

Almost Gone... Few in Stock

LPCAST-2 - 6" Diameter Burner Head with Adjustable Length Neck. Low Pressure Propane or Natural Gas Two-Part Burner (40,000 BTU/hr)             

Ideal for Smokers or Smokehouses

●  Designed for the burner head to be placed inside the burning area
    and the venturi to be placed on the outside of the system or away
    from the burning area, which the distance in between is
    determined by the length of a 3/4" black pipe nipple been used.
●  Venturi and Burner head have 3/4" Female Normal Pipe Threads.
● The burner head has four 10mm in diameter anchor bolts
●  The diameter of the burner head is 6" and the height is 2 1/2".
●  We recommend a distance of 2" from burner to the bottom of pot.

●  Provides a maximum output of  40,000 BTU/hr.
●  Includes a 90° 3/8" flare Orifice, air shutter, and Insect Screen Guard
    Or by request a 180° 3/8" flare orifice fitting is also available.
●  3/4" ID Pipe Nipple is NOT included. Pipe nipple must be at least 4".

Optional Accesories:

●  We recommend our Regulator COM5 for low pressure propane
●  We recommend our natural gas hoses for a natural gas set up.
●  The G-CVO Needle Control Valve Orifice.
●  Also our G-PILOT Assembly.

●  LPCAST-2 Video

We offer free shipping to 48 U.S. States. Wt. 5#.    

• 
•  

LPCAST-2 with CVO Neddle Valve Orifice
(Pipe nipple can be any length) 
      

                            
                                         LPCAST-2 with G-Pilot Assembly

     
                              Pilot can be adjustable from a Low Heat

                              
       Or adjusted to a High Heat                                            Bottom View