Home  >  Generator Connector Hose

 

CUSTOM CONSTRUCTION HEATER HOSES and GENERATOR CONNECTORS    

GasHosesandRegulators.com sells construction heater hoses that are custom made with male normal pipe thread swivel fittings on each end.  Every hose is pressure tested under nitrogen prior to shipping.  These are unreservedly the highest quality and safest generator connector hoses available.  Our stainless steel overbraid gas hoses are almost squirrel-proof.  These ANSI Z21.54 hose connectors are engineered and manufactured to the highest specifications in the industry.  Sturgis uses only UL-certified steel within the inner core and domestic CA360 brass in the milled-end fittings.  This exceeds all CSA connector certifications.  

We believe you should "do it once and do it right".  Pricing includes shipping within the 48 contiguous U.S. States via UPS Ground.  Links to engineering specifications, drawings, certifications, and approvals for the generator connector hoses are listed with the product descriptions. See bottom of page for further information on custom lengths and the appropriate hose ID for your generator.

 

  100LP585   - Generator 3/4" ID Quick Disconnect Hose for Low Pressure Propane or Natural Gas

  100LP585

100LP585 - Generator 3/4" ID Quick Disconnect Hose for Low Pressure Propane or Natural Gas. (3/4" QD Male Plug x 3/4" Male NPT Swivel).

♦  3/4" ID Generator Hose is rated for 5 PSI Max and can work with
    Low Pressure Propane or Natural Gas.

♦  Hose sizes are NOT measured by the Outside Diameter, measure
    the Inner Diameter.

♦  This hose requires an Optional 3/4" ID Female Socket,
    see below our model # 104089 or 104090.

♦  A Dust Cap is included with the purchase of each hose.


3/4"ID Custom length Generator Hoses are available by request.
Give us a call. 713.222.6095.


Weights:


  2 ft.    2 #
  6 ft.    3 #  
10 ft.    5 #  
15 ft.    7 #
20 ft.    9 #
25 ft.  12 #

We offer free shipping to 48 U.S. States.

 

Approval Letter for (3/4" ID) Connectors from CSA

Certification Record for (3/4" ID) Connectors from CSA

Certification Record for (3/4" ID) Connectors from CSA

Certification Record for (3/4" ID) Connectors from CSA

Certificate of Compliance for (3/4" ID) Connectors from CSA


Test Report for (3/4" ID) Connectors from CSA

Certificate of Compliance for (3/4" ID) Connectors from CSA

 

$79.95

 

 

  100LP607   - Generator 3/4" ID QD Hose with Stainless Steel Overbraid for Low Pressure Propane or Natural Gas

  100LP607

100LP607 - Generator 3/4" ID Quick Disconnect Hose with Stainless Steel Overbraid and High Temperature Poly-Jacketing for Low Pressure Propane or Natural Gas. (3/4" Quick Disconnect Male Plug x 3/4" Male NPT Swivel).
 

♦  3/4" ID Generator Stainless Steel Overbraid Hose is rated for
    60 PSI Max and can work with Low Pressure Propane or Natural Gas.

♦  Hose sizes are NOT measured by the Outside Diameter, measure
    the Inner Diameter.
♦ 
Stainless Steel Overbraid hose gives more protection to the hose
    and makes it almost squirrel-proof (or to any other critters).

♦  This hose requires an Optional 3/4" ID Female Socket,
    see below our model # 104089 or 104090.

♦  A Dust Cap is included with the purchase of each hose.


3/4"ID Custom length Generator Stainless Steel Overbraid Hoses
are available by request. Give us a call. 713.222.6095.

 
 
Weights:
 
  2 ft.    2#
  6 ft.    5# 
10 ft.    6# 
15 ft     8# 
20 ft   11# 
25 ft   13#

We offer free shipping to 48 U.S. States.

 

$97.95

 

 

  104LP089    - Generator 3/4" ID Quick Disconnect Female Socket x 3/4" ID Female NPT

  104LP089

104LP089 - Generator 3/4" ID QD Female Socket x 3/4" ID Female NPT.

♦  Generator 3/4" ID Female Quick Disconnect Socket is rated for
    5 PSI Max and can work with Low Pressure Propane or Natural Gas.

♦  A Dust Plug is included with the purchase of each hose.

We offer free shipping to 48 U.S. States.  Wt. 1# 7oz.


Socket is CSA certified for Indoor and Outdoor use in USA and Canada.
Certificate of Compliance from CSA   Test Report from CSA

$49.95

 

 

  104LP090   - Generator 3/4" ID Quick Disconnect Female Ball Valve Socket x 3/4" ID Female NPT

  104LP090

104LP090 - Generator 3/4" ID Quick Disconnect Female Ball Valve Socket x 3/4" ID Female NPT.

♦  Generator 3/4" ID Female QD Female Ball Valve Socket is rated for
    5 PSI Max and can work with Low Pressure Propane or Natural Gas.

♦  A Dust Plug is included with the purchase of each hose.

We offer free shipping to 48 U.S. States.  Wt. 1# 11oz.


Socket it's CSA certified for Indoor and Outdoor use in USA and Canada.
Certificate of Compliance from CSA   Test Report from CSA

$79.95

 

 

  5QDDP   - Generator 3/4" ID Dust Plug for Quick Disconnect Female Sockets

  5QDDP

5QDDP - Generator 3/4" ID Dust Plug for QD Female Sockets.
 
  Dust plugs colors may differ.
  Plugs fit both our model # 104089 and 104090.

  
This item does not qualify for return or exchange.
  The outside diameter of the Dust Plug insert is approximately 1".
 
There is no need to purchase a Dust Plug if you are purchasing a
    3/4" ID Female QD Socket,
since one is already included.


We offer free shipping to 48 U.S. States.  Wt. 1 oz.  

$8.95

 

 

  401LP606   - Generator 3/4" ID Quick Disconnect Male Plug x 3/4" ID Female NPT

  401LP606

401LP606 - Generator 3/4" ID QD Male Plug x 3/4" ID Female NPT.

♦  Generator 3/4" ID Quick Disconnect Male Plug can work with
    Low Pressure Propane or Natural Gas.

♦  A Dust Cap is included with the purchase of each plug.


We offer free shipping to 48 U.S. States.  Wt. 6 oz. 
 

$23.95

 

 

  5QDDC   - Generator 3/4" ID Dust Cap for Quick Disconnect Male Plug

  5QDDC

5QDDC - Generator 3/4" ID Dust Cap for Quick Disconnect Male Plug.

  Dust Cap colors may differ.
  This item does not qualify for return or exchange.

  The outside diameter of the Dust Cap is approximately 1".
 
Cap fit for our model # 401606 Plug, Hoses 100585 and 100607.

 
There is no need to purchase a Dust Cap if you are purchasing a
    3/4" ID Hose or a QD Male Plug,
since one is already included.


We offer free shipping to 48 U.S. States.  Wt. 1 oz.   

$8.95

 

 

  100LP518   - Generator 3/4" ID Hose for Low Pressure Propane or Natural Gas

  100LP518

100LP518 - Generator 3/4" ID Hose for Low Pressure Propane or Natural Gas. (3/4" Male NPT Swivel x 3/4" Male NPT Swivel).

♦  3/4" ID Generator Hose is rated for 5 PSI Max and can work with
    Low Pressure Propane or Natural Gas.

♦  Hose sizes are NOT measured by the Outside Diameter, measure
    the Inner Diameter.


3/4"ID Custom length Generator Hoses are available by request.
Give us a call. 713.222.6095. Minimum hose length is 16".

Weights:


  2 ft.    2 #
  6 ft.    3 #  
10 ft.    5 #  
15 ft.    7 #
20 ft.    9 #
25 ft.  12 #

We offer free shipping to 48 U.S. States.

 

$60.00

 

 

  100LP612   - Generator 3/4" ID Hose with Stainless Steel Overbraid for Low Pressure Propane or Natural Gas

  100LP612

100LP612 - Generator 3/4" ID Hose with Stainless Steel Overbraid and High Temperature Poly-Jacketing for Low Pressure Propane or Natural Gas. (3/4" Male NPT Swivel x 3/4" Male NPT Swivel).

♦  3/4" ID Generator Stainless Steel Overbraid Hose is rated for 60 PSI Max
    and can work with Low Pressure Propane or Natural Gas.

♦  Hose sizes are NOT measured by the Outside Diameter, measure the
    Inner Diameter.
♦ 
Stainless Steel Overbraid hose gives more protection to the hose and
    makes the hose almost squirrel-proof (or to any other gnawing critters).

3/4"ID Custom length Generator Stainless Steel Overbraid Hoses
are available by request. Give us a call. 713.222.6095.
Minimum hose length is 16".


Weights:
 
  2 ft.    2#
  6 ft.    5# 
10 ft.    6# 
15 ft     8# 
20 ft   11# 
25 ft   13#

We offer free shipping to 48 U.S. States.

 

$74.00

 

 

  100LP519   - Generator 1" ID Hose for Low Pressure Propane or Natural Gas

  100LP519

100LP519 - Generator 1" ID Hose for Low Pressure Propane or Natural Gas. (1" Male NPT Fixed x 1" Male NPT Swivel).

♦  1" ID Generator Hose is rated for 5 PSI Max and can work with
    Low Pressure Propane or Natural Gas.

♦  Hose sizes are NOT measured by the Outside Diameter, measure
    the Inner Diameter.


1"ID  Custom length Generator Hoses are available by request.
Give us a call. 713.222.6095. Minimum hose length is 24".


We offer free shipping to 48 U.S. States.

Approval Letter for (1" ID) Connectos from CSA

Certification Record for (1" ID) Connectors from CSA

Certificate for (1" ID) Connectors from CSA

 

$100.00

 

 

  100LP622   - Generator 1" ID Hose with Stainless Steel Overbraid for Low Pressure Propane or Natural Gas

  100LP622

100LP622 - Generator 1" ID Hose with Stainless Steel Overbraid and High Temperature Poly-Jacketing for Low Pressure Propane or Natural Gas.
(1" Male NPT Fixed x 1" Male NPT Swivel).

♦  1" ID Generator Stainless Steel Overbraid Hose is rated for
    60 PSI Max and can work with Low Pressure Propane or Natural Gas.

♦  Hose sizes are NOT measured by the Outside Diameter, measure
    the Inner Diameter.
♦ 
Stainless Steel Overbraid hose gives more protection to the hose
    and makes it almost squirrel-proof (or to any other critters).

1"ID Custom length Generator Stainless Steel Overbraid Hoses
are available by request. Give us a call. 713.222.6095.
Minimum hose length is 24".


We offer free shipping to 48 U.S. States.

 

$136.00

 

 

  100LP520   - Generator 1 1/4" ID Hose for Low Pressure Propane or Natural Gas

  100LP520

100LP520 - Generator 1 1/4" ID Hose for Low Pressure Propane or Natural Gas. (1 1/4" Male NPT Fixed x 1 1/4" Male NPT Swivel).

♦  1 1/4" ID Generator Hose is rated for 5 PSI Max and can work with
    Low Pressure Propane or Natural Gas.

♦  Hose sizes are NOT measured by the Outside Diameter, measure
    the Inner Diameter.


1 1/4"ID Custom length Generator Hoses are available by request.
Give us a call. 713.222.6095. Minimum hose length is 24".


We offer free shipping to 48 U.S. States.

 

$136.00

 

 

  100LP623   - Generator 1 1/4" ID Hose with Stainless Steel Overbraid for Low Pressure Propane or Natural Gas

  100LP623

100LP623 - Generator 1 1/4" ID Hose with Stainless Steel Overbraid and High Temperature Poly-Jacketing for Low Pressure Propane or Natural Gas.
(1 1/4" Male NPT Fixed x 1 1/4" Male NPT Swivel).

♦  1 1/4" ID Generator Stainless Steel Overbraid Hose is rated for
    60 PSI Max and can work with Low Pressure Propane or Natural Gas.

♦  Hose sizes are NOT measured by the Outside Diameter, measure
    the Inner Diameter.
♦ 
Stainless Steel Overbraid hose gives more protection to the hose
    and makes it almost squirrel-proof (or to any other critters).

1 1/4"ID Custom length Generator Stainless Steel Overbraid Hoses
are available by request. Give us a call. 713.222.6095.
Minimum hose length is 24".


We offer free shipping to 48 U.S. States.

 

$176.00

 

 

  100LP521   - Generator 1 1/2" ID Hose for Low Pressure Propane or Natural Gas

  100LP521

100LP521 - Generator 1 1/2" ID Hose for Low Pressure Propane or Natural Gas. (1 1/2" Male NPT Fixed x 1 1/2" Male NPT Swivel).

♦  1 1/2" ID Generator Hose is rated for 5 PSI Max and can work with
    Low Pressure Propane or Natural Gas.

♦  Hose sizes are NOT measured by the Outside Diameter, measure
    the Inner Diameter.


1 1/2"ID Custom length Generator Hoses are available by request.
Give us a call. 713.222.6095. Minimum hose length is 24".


We offer free shipping to 48 U.S. States.

 

$170.00

 

 

  100LP624   - Generator 1 1/2" ID Hose with Stainless Steel Overbraid for Low Pressure Propane or Natural Gas

  100LP624

100LP624 - Generator 1 1/2" ID Hose with Stainless Steel Overbraid and High Temperature Poly-Jacketing for Low Pressure Propane or Natural Gas.
(1 1/2" Male NPT Fixed x 1 1/2" Male NPT Swivel).

♦  1 1/2" ID Generator Stainless Steel Overbraid Hose is rated for
    60 PSI Max and can work with Low Pressure Propane or Natural Gas.

♦  Hose sizes are NOT measured by the Outside Diameter, measure
    the Inner Diameter.
♦ 
Stainless Steel Overbraid hose gives more protection to the hose
    and makes it almost squirrel-proof (or to any other gnawing critters).

1 1/2"ID Custom length Generator Stainless Steel Overbraid Hoses
are available by request. Give us a call. 713.222.6095.
Minimum hose length is 24".


We offer free shipping to 48 U.S. States.

 

$218.00

 

 

  100LP522   - Generator 2" ID Hose for Low Pressure Propane or Natural Gas

  100LP522

100LP522 - Generator 2" ID Hose for Low Pressure Propane or Natural Gas.
(2" Male NPT Fixed x 2" Male NPT Swivel).


♦  2" ID Generator Hose is rated for 5 PSI Max and can work with
    Low Pressure Propane or Natural Gas.

♦  Hose sizes are NOT measured by the Outside Diameter,
    we measure the Inner Diameter.


2"ID Custom length Generator Hoses are available by request.
Give us a call. 713.222.6095. Minimum hose length is 24".


We offer free shipping to 48 U.S. States.

 

$269.00

 

 

  100LP615   - Generator 2" ID Hose with Stainless Steel Overbraid for Low Pressure Propane or Natural Gas

  100LP615

100LP615 - Generator 2" ID Hose with Stainless Steel Overbraid and High Temperature Poly-Jacketing for Low Pressure Propane or Natural Gas.
(2" Male NPT Fixed x 2" Male NPT Swivel).

♦  2" ID Generator Stainless Steel Overbraid Hose is rated for
    60 PSI Max and can work with Low Pressure Propane or Natural Gas.

♦  Hose sizes are NOT measured by the Outside Diameter, measure
    the Inner Diameter.
♦ 
Stainless Steel Overbraid hose gives more protection to the hose
    and makes it almost squirrel-proof (or to any other gnawing critters).

2"ID Custom length Generator Stainless Steel Overbraid Hoses
are available by request. Give us a call. 713.222.6095.
Minimum hose length is 24".


We offer free shipping to 48 U.S. States.

 

$325.00

 

 

Generator Hose Size

  -

Watts HP 5' 10' 15' 20' 25' 30' 35' 40' 45' 50' 75' 100'
1850 3.5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5
2500 5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .5 .75 .75
3500 6 .5 .5 .5 .5 .5 .5 .5 .75 .75 .75 .75 .75
4000 8 .5 .5 .5 .5 .5 .75 .75 .75 .75 .75 1.0 1.0
5000 10 .5 .5 .75 .75 .75 .75 .75 .75 .75 1.0 1.0 1.0
6500 12 .75 .75 .75 .75 .75 .75 .75 .75 1.0 1.0 1.0 1.0
7000 13 .75 .75 .75 .75 .75 .75 .75 1.0 1.0 1.0 1.0 1.0
7500 15.5 .75 .75 .75 .75 .75 .75 .75 1.0 1.0 1.0 1.0 1.0
8000 16 .75 .75 .75 .75 .75 .75 .75 1.0 1.0 1.0 1.0 1.25
10 KW 20 .75 .75 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.25 1.25 1.25
12 KW 24 .75 .75 1.0 1.0 1.0 1.0 1.0 1.0 1.25 1.25 1.25 1.25

Use the above chart to choose the appropriate hose size for your generator

 

 

♦  Custom manufactured lengths of generator connector and construction heater hose made of strip wound or strip wound with stainless steel overbraid are available in sizes 3/8", 1/2", or 3/4" .  
♦  Custom hoses can be supplied with a male quick connect plug, quick connect socket, or male NPT swivel on either end of the hose.  Quick connect/disconnect fittings for the larger size hoses are available by special order but may take a few weeks.
♦  Sizes 1", 1 1/4", 1 1/2", and 2" ID, are supplied with fixed male normal pipe threads on one end and swivel male normal pipe threads on the other end.  

♦  Strip wound hoses are rated up to 5 psi natural gas or propane in strip wound and are rated to 60 psi for the strip wound with the stainless steel overbraid. 
♦  These are the absolute highest quality and safest generator connector and construction heater hoses available. 
♦  This is a special hose which will remain flexible in cold weather.  
♦  Custom generator hose and construction heater hose are shipped via UPS, only after pressure testing under nitrogen. 

Call 713.222.6095 at GasHosesandRegulators.com for pricing.