Home  >  Cooker Stands

 

Cooker Stands   

Our cast iron burners and outdoor cookers are heavy duty, well designed, and well constructed.  We invite you to compare them to any other outdoor cooking equipment.   Our welding is first rate and the sheer weight of the finished cast iron burners and cooker stands tells the rest of the story.  These units rock!  You will not find this quality of cooker stands at any of the Depots or mass-market Discounters.
 

Preset low pressure propane regulators are preset at 6 ounces. Low pressure burners and natural gas burners will produce 40,000 btu/hr.  We have low pressure burners that will produce 80,000 btu/hr, 100,000 btu/hr, and 120,000 btu/hr. Natural gas pressure in most areas is 10 water column inches and does not require a regulator; but if a 1/2" ID natural gas hose is used with the cooker stand some brass fitting adapters may be needed (see Brass Fitttings). Should you not find the cooker stand of your dreams among our wide selection, call us.  We can probably build it. All prices INCLUDE shipping to the 48 contiguous U.S. States.

 

CS3 - Cooker Stand, Triple Burner

  CS3

CS3 - Cooker Stand, Triple Burner. For High Pressure, Low Pressure or
Natural Gas. Includes (4) Leg Extensions.

This Triple Cooker Stand has a cook top surface of 42" x 14" with
8 spokes over each burner and the height of 15". The CS3 its a dual
height stand of 15" or 30". Includes (4) removable legs that will provide
the stand to be 30" in height and with a leg storage rack at the rear end
of the unit. It also comes with burners of your choice for High Pressure
Propane, Low Pressure Propane or Natural Gas. The (3) burners are
assemble together by a brass manifold which each burner will have a
Needle Control Valve with an orifice to adjust the flame directly from the
burner individually, the brass manifold has a  3/8" Male Gas Flare Inlet.

This unit has a front handle to make it more compact and easy to carry,
also to protect the brass manifold during transport.

● High Pressure Propane, with (3) HPCAST6 Burners (160,000 btu/hr).
   We recommend our COM1 Regulator for a high pressure set up.


● Low Pressure Propane, with (3) LPCAST Burners (40,000 btu/hr).
   We recommend our COM5 Regulator for a low pressure set up.


● Natural Gas, with (3) LPCAST Burners (40,000 btu/hr).
   We recommend our natural gas hoses for a natural gas set up.


Optional Accessories:

The Optional WING side table extensions works well with this unit which
could be added to either or both ends. The use of (1) Optional WING
will increase the width of the unit to 54". And the use of (2) Optional Wings
will make the width 66". An Optional WG3, 8" high double burner folding
Wind Guard is available. Check out our Small, Medium or Large Size
GRIDDLES which will be suitable for this unit and our BACON PRESS.
Also the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
And the 7CS3, Triple Burner Cooker Stand Heavy Duty Cover.



42"L x 17"W x 15"H, with the legs installed 42"L x 17"W x 30"H.  
We offer free shipping to 48 U.S. States. Wt. 57#.



 

  • Triple Burner Cooker Stand
    CS3H Cooker Stand Shown without the 24" Legs Which Are Included.
    This Base Unit Can Be Placed on the Ground or on a Fireproof Table or Countertop
  • Triple Burner Cooker Stand
    CS3N Cooker Stand without the 24" Leg Extensions Which Are Included.
    This Base Unit Can be placed on the Ground or on a Fireproof/Heat Resistant Table.
  • Triple Burner Cooker Stand
    Leg Storage Rack at the back side of the CS3

 

$339.95

 

 

CS3-COM - Cooker Stand COMBO, Triple Burner

  CS3-COM

CS3-COM - Cooker Stand COMBO, Triple Burner. For High Pressure,
Low Pressure or Natural Gas. Includes (4) Leg Extensions, Wind Guard,
(2) WINGS and Regulator Assembly or 5ft Natural Gas Hose.


This Triple Cooker Stand has a cook top surface of 42" x 14" with
8 spokes over each burner and the height of 15". The CS3 its a dual
height stand of 15" or 30". Includes (4) removable legs that will provide
the stand to be 30" in height and with a leg storage rack at the rear end
of the unit. It also comes with burners of your choice for High Pressure
Propane, Low Pressure Propane or Natural Gas. The (3) burners are
assemble together by a brass manifold which each burner will have a
Needle Control Valve with an orifice to adjust the flame directly from the
burner individually, the brass manifold has a  3/8" Male Gas Flare Inlet.

This unit has a front handle to make it more compact and easy to carry,
also to protect the brass manifold during transport.

COMBO includes: 8" high WG3 folding Wind Guard, (2) 12" x 14"  WING
Side Table Extensions and a propane regulator assembly according to the
set up you chose high pressure or low pressure or a 5ft natural gas hose.
(COMBO setup saves almost $75.00 over buying all the items separately!)


● High Pressure Propane, with (3) HPCAST6 Burner (160,000 btu/hr).
   Includes a COM1 Regulator for a high pressure set up.


● Low Pressure Propane, with (3) LPCAST Burner (40,000 btu/hr).
   Includes a COM5 Regulator for a low pressure set up.


● Natural Gas, with (3) LPCAST Burner (40,000 btu/hr).
   Includes a 5ft 3/8" ID Natural Gas Hose for a natural gas set up.


Optional Accessories:


Check out our GRIDDLES and our BACON PRESS.
Also the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
And the 7CS3, Triple Burner Cooker Stand Heavy Duty Cover.


42"L x 17"W x 15"H, with the legs installed 42"L x 17"W x 30"H.
We offer free shipping to 48 U.S. States. Wt. 75#.

 

  • Triple Burner Cooker Stand COMBO
    CS3H-COM Cooker Stand COMBO Includes WG3 Wind Guard, (2) Legs,
    (2) WING Side Table Extensions, and COM1 High Pressure Propane Regulator
  • Triple Burner Cooker Stand COMBO
    CS3L-COM Cooker Stand Shown with Optional Small Griddle and Bacon Press
  • Triple Burner Cooker Stand COMBO
    Leg Storage Rack at the back side of the CS3-COMBO

 

$439.95

 

 

7CS3 - Cooker Stand Series, Triple Burner Cooker Stand Premium Heavy Duty Vinyl Cover

  7CS3

7CS3 - Triple Burner Cooker Stand Premium Heavy Duty Vinyl Cover
For CS3, CS8-3, CS10-3 Cooker Stands.

This Premium Heavy Duty Vinyl Cover has a smooth interior lining and
its also water resistant. Made out of a grey color outdoor spa covering
material and has a flexible feel like that of a heavy weight Naugahyde®.
Has metal grommets to use with a bungee cord for high wind conditions.

We offer free shipping to 48 U.S. States. Wt. 5#.

$96.95

 

 

CS2 - Cooker Stand, Double Burner

  CS2

CS2 - Cooker Stand, Double Burner. For High Pressure, Low Pressure or Natural Gas. Includes (4) Leg Extensions.

This Double Cooker Stand has a cook top surface of 28" x 14" with
8 spokes over each burner and the height of 15". The CS2 its a dual
height stand of 15" or 30". Includes (4) removable legs that will provide
the stand to be 30" in height and with a leg storage rack at the rear end
of the unit. It also comes with burners of your choice for High Pressure
Propane, Low Pressure Propane or Natural Gas. The (2) burners are
assemble together by a brass manifold which each burner will have a
Needle Control Valve with an orifice to adjust the flame directly from the
burner individually, the brass manifold has a  3/8" Male Gas Flare Inlet.

This unit has a front handle to make it more compact and easy to carry,
also to protect the brass manifold during transport.

● High Pressure Propane, with (2) HPCAST6 Burners (160,000 btu/hr).
   We recommend our COM1 Regulator for a high pressure set up.


● Low Pressure Propane, with (2) LPCAST Burners (40,000 btu/hr).
   We recommend our COM5 Regulator for a low pressure set up.


● Natural Gas, with (2) LPCAST Burners (40,000 btu/hr).
   We recommend our natural gas hoses for a natural gas set up.


Optional Accessories:

The Optional WING side table extensions works well with this unit which
could be added to either or both ends. The use of (1) Optional WING
will increase the width of the unit to 40". And the use of (2) Optional Wings
will make the width 52". An Optional WG2, 8" high double burner folding
Wind Guard is available. Check out our Small or Medium Size
GRIDDLES which will be suitable for this unit and our BACON PRESS.
Also the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.

And the 7CS2, Double Burner Cooker Stand Heavy Duty Cover.


28"L x 17"W x 15"H, with the legs installed 28"L x 17"W x 30"H.  
We offer free shipping to 48 U.S. States. Wt. 46#.

 

  • Double Burner Cooker Stand
    CS2 Cooker Stand without the Included Leg Extensions Installed
    Unit May Be Also Used as a Table Top Hot Plate on a Fire/Heat
    Resistant Surface
  • Double Burner Cooker Stand
    Leg Storage Rack at the back side of the CS2

 

$229.95

 

 

CS2-COM - Cooker Stand COMBO, Double Burner

  CS2-COM

CS2-COM - Cooker Stand COMBO, Double Burner. For High Pressure,
Low Pressure or Natural Gas. Includes (4) Leg Extensions, Wind Guard,
(2) WINGS and Regulator Assembly or 5ft Natural Gas Hose.


This Double Cooker Stand has a cook top surface of 28" x 14" with
8 spokes over each burner and the height of 15". The CS2 its a dual
height stand of 15" or 30". Includes (4) removable legs that will provide
the stand to be 30" in height and with a leg storage rack at the rear end
of the unit. It also comes with burners of your choice for High Pressure
Propane, Low Pressure Propane or Natural Gas. The (2) burners are
assemble together by a brass manifold which each burner will have a
Needle Control Valve with an orifice to adjust the flame directly from the
burner individually, the brass manifold has a  3/8" Male Gas Flare Inlet.

This unit has a front handle to make it more compact and easy to carry,
also to protect the brass manifold during transport.

COMBO includes: 8" high WG2 folding Wind Guard, (2) 12" x 14"  WING
Side Table Extensions and a propane regulator assembly according to the
set up you chose high pressure or low pressure or a 5ft natural gas hose.
(COMBO setup saves almost $70.00 over buying all the items separately!)


● High Pressure Propane, with (2) HPCAST6 Burner (160,000 btu/hr).
   Includes a COM1 Regulator for a high pressure set up.


● Low Pressure Propane, with (2) LPCAST Burner (40,000 btu/hr).
   Includes a COM5 Regulator for a low pressure set up.


● Natural Gas, with (2) LPCAST Burner (40,000 btu/hr).
   Includes a 5ft 3/8" ID Natural Gas Hose for a natural gas set up.


Optional Accessories:


Check out our Small and Medium GRIDDLES and our BACON PRESS.
Also the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
And the 7CS2, Double Burner Cooker Stand Heavy Duty Cover.


28"L x 17"W x 15"H, with the legs installed 28"L x 17"W x 30"H.
We offer free shipping to 48 U.S. States. Wt. 72#.

 

  • Double Burner Cooker Stand COMBO
    CS2L-COM Shown with Included WG2 Wind Guard, (2) WING Side Table Extensions,
    (4) Leg Extensions, and a COM5 Preset Low Pressure Propane Regulator
  • Double Burner Cooker Stand COMBO
    CS2H-COM Shown Disassembled, Includes WG2 Wind Guard, (2) Wing Side Table
    Extensions, (4) Leg Extensions, and a COM5 Preset Low Pressure Propane
    Regulator. Base Unit May Be Used as a Table Top Hot Plate on a Fire/Heat
    Resistant Surface or on the Ground When Using a Very Large Pot
  • Double Burner Cooker Stand COMBO
    Leg Storage Rack at the back side of the CS2-COMBO

 

$319.95

 

 

7CS2 - Cooker Stand Series, Double Burner Cooker Stand Premium Heavy Duty Vinyl Cover

  7CS2

7CS2 - Double Burner Cooker Stand Premium Heavy Duty Vinyl Cover
For CS2, CS8-2, and CS10-2 Cooker Stands.

This Premium Heavy Duty Vinyl Cover has a smooth interior lining and
its also water resistant. Made out of a grey color outdoor spa covering
material and has a flexible feel like that of a heavy weight Naugahyde®.
Has metal grommets to use with a bungee cord for high wind conditions.

We offer free shipping to 48 U.S. States. Wt. 4#.

$96.95

 

 

CS1 - Cooker Stand, Single Burner

  CS1

CS1 - Cooker Stand Single Burner. For High Pressure, Low Pressure or Natural Gas. Includes (4) Leg Extensions.

This Cooker Stand has a cook top of 8 spokes the surface its 15" x 15"
and the height of 15". The CS1 its a dual height stand of 15" or 30".
Includes (4) removable legs that will provide the stand to be 30" in height.
It also comes with a burner of your choice for High Pressure Propane,
Low Pressure Propane or Natural Gas. In the burner there is a CVO125
(Control Valve Orifice) to adjust the flame directly from the burner.

● High Pressure Propane, with (1) HPCAST6 Burner (160,000 btu/hr).
   We recommend our COM1 Regulator for a high pressure set up.


● Low Pressure Propane, with (1) LPCAST Burner (40,000 btu/hr).
   We recommend our COM5 Regulator for a low pressure set up.


● Natural Gas, with (1) LPCAST Burner (40,000 btu/hr).
   We recommend our natural gas hoses for a natural gas set up.


Optional Accessories:

The Optional WING side table extensions work well with this unit and the
Optional WG1, 8" high single burner folding Wind Guard is available.
Check out the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
Also the Small GRIDDLES and our BACON PRESS.
And the 7CS1, Single Burner Cooker Stand Heavy Duty Cover.



15"L x 15"W x 15"H, with the legs installed 15"L x 15"W x 30"H.
We offer free shipping to 48 U.S. States. Wt. 27#.


 

  • Single Burner Cooker Stand
    CS1H shown without the (4) Leg
    Extensions Which Are Included

 

$138.95

 

 

CS1-COM - Cooker Stand COMBO, Single Burner

  CS1-COM

CS1-COM - Cooker Stand COMBO, Single Burner. For High Pressure,
Low Pressure or Natural Gas. Includes (4) Leg Extensions, Wind Guard,
(2) WINGS and Regulator Assembly or 5ft Natural Gas Hose.

This Cooker Stand has a cook top of 8 spokes the surface its 15" x 15"
and the height of 15". The CS1 its a dual height stand of 15" or 30".
Includes (4) removable legs that will provide the stand to be 30" in height.
It also comes with a burner of your choice for High Pressure Propane,
Low Pressure Propane or Natural Gas. In the burner there is a CVO125
(Control Valve Orifice) to adjust the flame directly from the burner.


COMBO includes: 8" high WG1 folding Wind Guard, (2) 12" x 14"  WING
Side Table Extensions and a propane regulator assembly according to the
set up you chose high pressure or low pressure or a 5ft natural gas hose.
(COMBO setup saves almost $23.00 over buying all the items separately!) 

● High Pressure Propane, with (1) HPCAST6 Burner (160,000 btu/hr).
   Includes a COM1 Regulator for a high pressure set up.


● Low Pressure Propane, with (1) LPCAST Burner (40,000 btu/hr).
   Includes a COM5 Regulator for a low pressure set up.


● Natural Gas, with (1) LPCAST Burner (40,000 btu/hr).
   Includes a 5ft 3/8" ID Natural Gas Hose for a natural gas set up.


Optional Accessories:


Check out our Small GRIDDLES and our BACON PRESS.
Also the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
And the 7CS1, Single Burner Cooker Stand Heavy Duty Cover.


15"L x 15"W x 15"H, with the legs installed 15"L x 15"W x 30"H.

We offer free shipping to 48 U.S. States. Wt. 46#.



  • Single Burner Cooker Stand Combo
    The CS1H-COM Base Unit Can Be Used As a Cooker Stand and
    Placed either on the Ground or on an Elevated Fireproof Surface

 

$259.95

 

 

7CS1 - Cooker Stand Series, Single Burner Cooker Stand Premium Heavy Duty Vinyl Cover

  7CS1

7CS1 - Single Burner Cooker Stand Premium Heavy Duty Vinyl Cover
For CS1, CS8-1 and CS10-1 Cooker Stands.


This Premium Heavy Duty Vinyl Cover has a smooth interior lining and
its also water resistant. Made out of a grey color outdoor spa covering
material and has a flexible feel like that of a heavy weight Naugahyde®.
Has metal grommets to use with a bungee cord for high wind conditions.

We offer free shipping to 48 U.S. States. Wt. 3#.

$89.95

 

 

CS8 - Low Pressure Propane or Natural Gas Cooker Stand Series with 8" Diameter 80,000 Btu/hr Burners

  CS8

CS8 - Low Pressure Propane or Natural Gas Cooker Stand Series
with  8" Diameter Cast Iron (80,000 btu/hr) Burners.
Single, Double or Triple burner models. With (4) Leg Extensions.

 

GasHosesandRegulators.com has design this new cast iron burner which puts out 80,000 btu/hr. Designed for more btu/hr output of a natural gas or low pressure propane use. The CS8 reaches higher btu/hr levels while still having control of the heat (down to a simmer) with the needle control valves. The 8" wide burner surface gives more heat over a wider area on the bottom of your pans or pots. The CS8 its a dual height stand of 15" or 30". Includes (4) removable legs that will provide the stand to be 30" in height and with a leg storage rack at the rear end of the unit.



Optional Accessories:

We recommend our COM5 Regulator for a low pressure set up.
We recommend our natural gas hoses for a natural gas set up.
The Optional WING side table extensions work well with this unit and the
Optional 8" high single burner folding Wind Guard is available.
Check out the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
Also the GRIDDLES and our BACON PRESS.

Dimensions:

CS
8-1 - 15"L x 15"W x 15"H, with the legs installed 15"L x 15"W x 30"H.

CS8-2 - 28"L x 17"W x 15"H, with the legs installed 28"L x 17"W x 30"H

CS8-3 - 42"L x 17"W x 15"H, with the legs installed 42"L x 17"W x 30"H.



We offer free shipping to 48 U.S. States. Wt. 39#, 64# and 88#.
 

  • Single Burner Cooker Stand with a 8in Burner
    CS8-1L Shown without the (4) Legs Which are Included
  • Double Burner Cooker Stand with 8in Burners   Double Burner Cooker Stand with 8in Burners
    CS8-2L Shown with and without the Included Leg Extensions
  • Double Burner Cooker Stand with 8in Burners
    Leg Storage Rack at the back side of the CS8-2
  • Triple Burner Cooker Stand with  8in Diameter Burners
    CS8-3L Shown with the Included Leg Extensions
  • Triple Burner Cooker Stand with a 8in Burners
    Leg Storage Rack at the back side of the CS8-3

 

$219.95

 

 

CS8-COM - Low Pressure or Natural Gas Cooker Stand COMBO Series with 8" Diameter 80,000 Btu/hr Burners

  CS8-COM

CS8-COM - Low Pressure Propane or Natural Gas Cooker Stand COMBO
Series with  8" Diameter Cast Iron (80,000 btu/hr) Burners. Includes
(4) Leg Extensions, Wind Guard, (2) WINGS and Regulator Assembly or
5ft Natural Gas Hose.
Single, Double or Triple burner models.

 

GasHosesandRegulators.com has design this new cast iron burner which puts out 80,000 btu/hr. Designed for more btu/hr output of a natural gas or low pressure propane use. The CS8 reaches higher btu/hr levels while still having control of the heat (down to a simmer) with the needle control valves. The 8" wide burner surface gives more heat over a wider area on the bottom of your pans or pots. The CS8 its a dual height stand of 15" or 30". Includes (4) removable legs that will provide the stand to be 30" in height and with a leg storage rack at the rear end of the unit.


COMBO includes: 8" high WG folding Wind Guard, (2) 12" x 14"  WING
Side Table Extensions and a COM5 regulator or a 5ft natural gas hose.



Optional Accessories:

Check out our GRIDDLES and our BACON PRESS.
Also the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.

Dimensions:

CS
8-1 - 15"L x 15"W x 15"H, with the legs installed 15"L x 15"W x 30"H.

CS8-2 - 28"L x 17"W x 15"H, with the legs installed 28"L x 17"W x 30"H

CS8-3 - 42"L x 17"W x 15"H, with the legs installed 42"L x 17"W x 30"H.


We offer free shipping to 48 U.S. States. Wt. 58#, 86# and 114#.


 

  • Single Burner Cooker Stand with a 8in Burner COMBO
    CS8-1L COMBO (2) Wings Side Extensions, COM5 Regulator,
    WG3 Wind Guard and (4) Leg Extensions
  • Triple Burner Cooker Stand with 8in Burners COMBO
    CS8-3LCOM Has (3) 80,000 btu/hr Low Pressure Burners
  • Triple Burner Cooker Stand with a 8in Burners
    Leg Storage Rack at the back side of the CS8-3 COMBO

 

$319.95

 

 

CS10 - Low Pressure Propane or Natural Gas Cooker Stand Series with 10" Diameter 100,000 Btu/hr Burners

  CS10

CS10 - Low Pressure Propane or Natural Gas Cooker Stand Series
with  10" Diameter Cast Iron (100,000 btu/hr) Burners.
Single, Double or Triple burner models. With (4) Leg Extensions.

 

Designed for more btu/hr output of a natural gas or low pressure propane use. The CS10 reaches higher btu/hr levels while still having control of the heat (down to a simmer) with the needle control valves. The 10" wide burner surface gives more heat over a wider area on the bottom of your pans or pots. The CS10 its a dual height stand of 15" or 30". Includes (4) removable legs that will provide the stand to be 30" in height and with a leg storage rack at the rear end of the unit.


Optional Accessories:

We recommend our COM5 Regulator for a low pressure set up.
We recommend our natural gas hoses for a natural gas set up.
The Optional WING side table extensions work well with this unit and the
Optional 8" high single burner folding Wind Guard is available.
Check out the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
Also the GRIDDLES and our BACON PRESS.

Dimensions:

CS
10-1 - 15"L x 15"W x 15"H, with the legs installed 15"L x 15"W x 30"H.

CS10-2 - 28"L x 17"W x 15"H, with the legs installed 28"L x 17"W x 30"H

CS10-3 - 42"L x 17"W x 15"H, with the legs installed 42"L x 17"W x 30"H.



We offer free shipping to 48 U.S. States. Wt. 41#, 68# and 92#.


  • Single Burner Cooker Stand with a 10in Diameter Burner
    CS10 Shown without the (4) Legs which are Included
  • Double Burner Cooker Stand with 10in Diameter Burners   Double Burner Cooker Stand
    CS10-2 Shown with and without the included Leg Extensions
  • Triple Burner Cooker Stand with 10in Diameter Burners
    CS10-3 Triple Burner Cooker Stand with 10" Diameter Burners

 

$219.95

 

 

CS10-COM - Low Pressure or Natural Gas Cooker Stand COMBO Series with 10" Diameter 100,000 Btu/hr Burners

  CS10-COM

CS10-COM - Low Pressure Propane or Natural Gas Cooker Stand COMBO
Series with  10" Diameter Cast Iron (100,000 btu/hr) Burners. Includes
(4) Leg Extensions, Wind Guard, (2) WINGS and Regulator Assembly or
5ft Natural Gas Hose.
Single, Double or Triple burner models.


Designed for more btu/hr output of a natural gas or low pressure propane use. The CS10 reaches higher btu/hr levels while still having control of the heat (down to a simmer) with the needle control valves. The 10" wide burner surface gives more heat over a wider area on the bottom of your pans or pots. The CS10 its a dual height stand of 15" or 30". Includes (4) removable legs that will provide the stand to be 30" in height and with a leg storage rack at the rear end of the unit.


COMBO includes: 8" high WG folding Wind Guard, (2) 12" x 14"  WING
Side Table Extensions and a COM5 regulator or a 5ft natural gas hose.



Optional Accessories:

Check out our GRIDDLES and our BACON PRESS.
Also the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.

Dimensions:

CS
10-1 - 15"L x 15"W x 15"H, with the legs installed 15"L x 15"W x 30"H.

CS10-2 - 28"L x 17"W x 15"H, with the legs installed 28"L x 17"W x 30"H

CS10-3 - 42"L x 17"W x 15"H, with the legs installed 42"L x 17"W x 30"H.


We offer free shipping to 48 U.S. States. Wt. 63#, 90# and 119#.


 

  • Single Burner Cooker Stand with a 10in Burner COMBO
    CS10-1LCOM Cooker Stand with (4) Leg Extensions, WG1 Wind Guard,
    (2) WING Side Table Extensions, and a Low Pressure PRESET Propane Regulator
  • Double Burner Cooker Stand with  10in Burners COMBO   Double Burner Cooker Stand with  10in Burners COMBO
    CS10-2LCOM Cooker Stand with (4) Leg Extensions, WG1 Wind Guard,
    (2) WING Side Table Extensions, and a Low Pressure PRESET Propane Regulator
  • Triple Burner Cooker Stand with  10in Burners COMBO   Double Burner Cooker Stand with  10in Burners COMBO
    CS10-3LCOM Cooker Stand with (4) Leg Extensions, WG1 Wind Guard,
    (2) WING Side Table Extensions, and a Low Pressure PRESET Propane Regulator

 

$319.95

 

 

CS12 - Low Pressure Propane or Natural Gas Single Burner Cooker Stand with a 12" Diameter 120,000 Btu/hr Burner

  CS12

CS12 - Low Pressure Propane or Natural Gas Single Burner
Cooker Stand
with a 12" Diameter Cast Iron (120,000 btu/hr) Burner.

This Cooker Stand has a cook top of 8 spokes the surface its 15" x 15"
and the height of 15". The CS12 its a dual height stand of 15" or 30".
Includes (4) removable legs that will provide the stand to be 30" in height.

Designed for more btu/hr output on natural gas or low pressure propane.
The 12" wide burner surface gives more heat over a wider area on the
bottom of your pans or pots.
The burner comes with a CVO250
(Control Valve Orifice) to adjust the flame directly from the burner.


Optional Accessories:

We recommend our COM5 Regulator for a low pressure set up.
We recommend our natural gas hoses for a natural gas set up.
The Optional WING side table extensions work well with this unit and the
Optional 8" high single burner folding Wind Guard is available.
Check out the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
Also the Small GRIDDLES and our BACON PRESS.
And the 7CS12, Single Burner Cooker Stand Heavy Duty Cover.



15"L x 15"W x 15"H, with the legs installed 15"L x 15"W x 30"H.
We offer free shipping to 48 U.S. States. Wt. 47#.

 

  • Single  Burner Cooker Stand with a 12in Diameter Burner
    CS12-N Cooker Stand for Natural Gas Which Outputs
    Up To 120,000 btu/hr! Shown Without the Included Legs
    Also Available for Use with Low Pressure Propane

 

$239.95

 

 

CS12-COM - Low Pressure or Natural Gas Single Burner Cooker Stand COMBO with a 12" Diameter 120,000 Btu/hr Burner

  CS12-COM

CS12-COM - Low Pressure Propane or Natural Gas Single Burner
Cooker Stand COMBO with a 12" Diameter (120,000 btu/hr) Burner.
Includes (4) Leg Extensions, Wind Guard, (2) WINGS and
Regulator Assembly or 5ft Natural Gas Hose.


This Cooker Stand has a cook top of 8 spokes the surface its 15" x 15"
and the height of 15". The CS12 its a dual height stand of 15" or 30".
Includes (4) removable legs that will provide the stand to be 30" in height.

Designed for more btu/hr output on natural gas or low pressure propane.
The 12" wide burner surface gives more heat over a wider area on the
bottom of your pans or pots.
The burner comes with a CVO250
(Control Valve Orifice) to adjust the flame directly from the burner.

COMBO includes: 8" high WG1 folding Wind Guard, (2) 12" x 14"  WING
Side Table Extensions and a COM5 regulator or a 5ft natural gas hose.



Optional Accessories:

Check out our GRIDDLES and our BACON PRESS.
Also the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
And the 7CS12, Single Burner Cooker Stand Heavy Duty Cover.


15"L x 15"W x 15"H, with the legs installed 15"L x 15"W x 30"H.
We offer free shipping to 48 U.S. States. Wt. 69#.

 

  • Single  Burner Cooker Stand with a 12in Diameter Burner COMBO
    CS12-LCOM Cooker Stand Shown Disassembled. Above
    Burner Is Set Up For Using Low Pressure Propane

 

$339.95

 

 

7CS12 - CS12 Cooker Stand Cover, Single Burner Cooker Stand Premium Heavy Duty Vinyl Cover

  7CS12

7CS12 - Single Burner Cooker Stand Premium Heavy Duty Vinyl Cover
For CS12 Cooker Stand Only.


This Premium Heavy Duty Vinyl Cover has a smooth interior lining and
its also water resistant. Made out of a grey color outdoor spa covering
material and has a flexible feel like that of a heavy weight Naugahyde®.
Has metal grommets to use with a bungee cord for high wind conditions.

We offer free shipping to 48 U.S. States. Wt. 3#.

$89.95

 

 

COM5 - 11" WC Low Pressure PRESET Regulator Assembly

  ​COM5

COM5 - 11" WC Low Pressure PRESET Regulator Assembly with a POL tank fitting and a 3/8" ID UL approved AGA hose, with 3/8" Female SAE gas flare swivel end fitting.

■ 160,000 btu/hr Maximum Output.

Green Acme Optional tank fitting is available at an additional charge.


We offer free shipping to 48 U.S. States. Wt. 2#. (with a 5 ft hose).

 

$39.95

 

 

COM5-UL - 11" WC Low Pressure PRESET Regulator with Ball Valve

  ​COM5-UL

COM5-UL - 11" WC Low Pressure PRESET Regulator Assembly with a POL tank fitting, Ball Valve to control the gas and a 3/8" ID UL approved AGA hose, with 3/8" Female SAE gas flare swivel end fitting.

■ 160,000 btu/hr Maximum Output.

Green Acme Optional tank fitting is available at an additional charge.


We offer free shipping to 48 U.S. States. Wt. 2#. (with a 5 ft hose).

 

$48.95

 

 

COM1 - 10 PSI High Pressure PRESET Regulator

  COM1

COM1 -  10 PSI High Pressure PRESET Regulator Assembly with a
POL tank fitting and a 1/4"ID UL approved hose.

Appropriate for outdoor cooking appliances such as cookers.

QDC - Optional Quick Disconnect High Pressure Hose Combination Set
is available at an additional charge.

Red Acme Optional Type 1 tank fitting is available at an additional charge.


We offer free shipping to 48 U.S. States. Wt. 2# (with a 5 ft hose).

 

$37.95

 

 

COM1-UL - 10 PSI High Pressure PRESET Regulator with UL-Approved Ball Valve

  ​COM1-UL

COM1-UL - 10 PSI High Pressure PRESET Regulator Assembly with a
POL tank fitting, a UL-approved Ball Valve, and a 1/4"ID hose.

Appropriate for outdoor cooking appliances such as cookers or cast iron burners.

QDC - Optional Quick Disconnect High Pressure Hose Combination Set
is available at an additional charge.

Red Acme Optional Type 1 tank fitting is available at an additional charge.


We offer free shipping to 48 U.S. States. Wt. 2# (with a 5 ft hose).

 

$45.95

 

 

GRIDDLE - Cooker Stands Griddles, Small, Medium or Large Size

  ​GRIDDLE

GRIDDLE - Cooker Stands Griddles, Small, Medium or Large Size.
 

Purchasing one of our griddles is the perfect combination to any of our cooker stands. Which will allow you to cook: Pancakes, Pork Chops, Steaks, Fajitas, Tortillas, Hash Browns, Eggs, Sausage, Bacon, Meat Patties and any griddle cook food. The griddles come with a grease tray which is removable for easy storage and cleaning. Our griddles have three walls, one on the left, right and center which are  2" high also the entire griddle has a thickness of 3/16". Well designed to sit on top of any cooker stand giving you the option of three sizes to choose from:

■   Small griddle, Over All Lenght: 17" x 15 1/2" x 5"
     Cooking Surface of 14" x 14" x 2"
 

■   
Medium griddle, Over All Lenght: 17" x 28 1/2" x 5"
     Cooking Surface of 14" x 27" x 2"


■   
Large griddle, Over All Lenght: 17" x 42 1/2" x 5"
    
Cooking Surface of 14" x 41" x 2"
  
We offer free shipping to 48 U.S. States. Wt. 22#, 31#, 45#.


 

  • Large Griddle Shown on CS3 Along With Optional BACON Press
    Large Griddle Shown on CS3 Along With Optional BACON Press

 

$129.95

 

 

BACON - 13 " x 13" Bacon Press with Stainless Steel Spring Handle

  ​BACON

BACON - 13" x 13" Bacon Press with Stainless Steel Spring Handle

The Bacon Press was designed to be used with our griddles on all sizes. Ideal for bacon, you will enjoy how the bacon cooks perfectly flat. Even though its called Bacon Press its also suitable for grilled sandwiches, quesadillas, hash browns, pork chops, patties and even more. It has a flat surface of 13" x 13", with a welded Stainless Steel Spring Handle that will remain cool to the touch. It also comes with a  fitting on the side to rest the bacon press up vertically to the side of the griddle.


We offer free shipping to 48 U.S. States. Wt. 8#.
 

  • Large Bacon Press with Stainless Steel Spring Handle
    BACON Press Shown on Large Griddle

$74.95

 

 

RING1 - Diameter 11" x Height 2", Large Wok Ring

  ​RING1

​RING1 - Diameter 11" x Height 2", Large Wok Ring
 

This Large Wok Ring has 11" in Diamber by 2" of Height. Buy it with any Cooker Stand and we will notch out grooves in the Wok Ring itself so that it will seat in the spokes of your cooking surface, at no extra cost.
 

Note: We notch the Wok Ring with the purchase of a Cooker Stand. If a Cooker Stand has already been shipped or another unit that you already have, we do not guarantee that notching the Wok Ring will fit.

We offer free shipping to 48 U.S. States. Wt. 3#.

 

  • Notch Wok Ring 11in x 2in
    Notch Wok Ring 11" x 2 "

$28.95

 

 

RING2 - Diameter 9" x Height 3", Small Wok Ring

  ​RING2

RING2 - Diameter 9" x Height 3", Small Wok Ring
 

This Small Wok Ring has 9" in Diamber by 3" of Height. Buy it with any Cooker Stand and we will notch out grooves in the Wok Ring itself so that it will seat in the spokes of your cooking surface, at no extra cost.
 

Note: We notch the Wok Ring with the purchase of a Cooker Stand. If a Cooker Stand has already been shipped or another unit that you already have, we do not guarantee that notching the Wok Ring will fit.

We offer free shipping to 48 U.S. States. Wt. 4#.

 

  • Notch Wok Ring 9in x 3in
    Notch Wok Ring 9" x 3"

$28.95

 

 

WING - Cooker Stands Side Table Extension 

  WING

WING - Cooker Stands Side Table Extension


The WING attaches easily to any of our Cooker Stands to either or both ends of the unit to expand the side area for cooking accessories. Each WING is 12" x 14" which is build with 1" angle iron and expanded metal. 

We offer free shipping to 48 U.S. States. Wt. 6#.

$28.95

 

 

WG - Cooker Stands Single, Double and Triple Burner Wind Guards

  ​WG

WG - Cooker Stands Single, Double and Triple Burner Wind Guards
 

The WG attaches and detaches easily from the cooking surface of our Cooker Stands for cooking outdoors easier in high wind conditions. Wind Guards are 8" tall and are build with 16 gauge sheet metal, also each wind guard has two heavy duty hinges so it could be folded for storage.

 

  • Double Burner Wind Guard
    WG2 Wind Guard
  • Triple Burner Wind Guard
    WG3 Wind Guard Folded Up for Storage
  • Single, Dual and Triple Burner Wind Guards
    Wts: 8# 11#, 15#.. Free shipping within the 48 contiguous U.S. States.

 

$66.95

 

 

GasHosesandRegulators.com has other cookers and cooker stands which can operate at higher heights from the ground using removable legs.  We can supply an optional ball valve for control of the gas for any of these cookers outfitted for natural gas.  Call us for information if you are interested:  713.222.6095.