Home  >  High Pressure Regulators

 

High Pressure Propane Regulators - Valve and Hose Assemblies 


GasHosesandRegulators.com has M.B. Sturgis-brand propane gas regulators for high pressure propane tank regulation. They are Preset (at 10 psi or 20 psi) or Adjustable pressure propane regulators (at 0-20 psi for the norm, or at 0-30 psi or 0-60 psi for circumstances where higher gas volumes are required).  Outdoor high heat cookers most often need high pressure propane from tanks which require such a high pressure regulator.
 

Gas grills up to about 50,000 btu/hr most often use low pressure propane which will require a low pressure propane regulator. Low pressure can be natural gas, or propane piped into a trailer home or RV, or a conventional home in which the propane gas has already been adjusted to a very low pressure at the tank source.


Preset low pressure propane gas regulators are set at 6 ounces. Natural gas pressure in most areas is 10 ounces (or less) and does not normally require a regulator of this sort.  All prices INCLUDE shipping. {Handy conversions: 1" WC = 0.036127 psi , 16 oz. = 1 pound}   We ship everywhere in the world...and the shipping is free to the 48 contiguous US states.

 

204077 - Red Acme Type 1 Wrench-less Safety Tank Connector with Excess Flow Protection

  204077

204077 - Red Acme Type 1 Wrench-less Safety Tank Connector with safety shut-off features of: (1) a thermally-sensitive sleeve which also will shut the gas off if it senses temperatures above 240°F and
(2) detecting excessive gas flow
.

► 1 5/16" x 1/4" M NPT fitting size.

► Not for use on smaller gas grills and other low pressure devices.

400,000 btu/hr maximum output capacity.  Designed for the 0-60 psi
     series adjustable high pressure propane gas regulator valves.


We will install it on the regulator you order. No installation charges.

► Installation requires use of an 11/16" socket, preferably 6 point. 

Red Acme Inlet Tank Fitting Video  


We offer free shipping to 48 U.S. States. Wt.  2.7 oz. 

  
Pictured below, for example, is a Red Acme inlet fitting installed on COM1 (10 PSI) regulator assembly.

  • Red Acme Type 1 Wrench-less Safety Tank Connector with Excess Flow Protection
    Red Acme Safety Tank Fitting on
    High Pressure Regulator
  • Red Acme Type 1 Wrench-less Safety Tank Connector with Excess Flow Protection
    Red Acme-Regulator Side
  • Red Acme Type 1 Wrench-less Safety Tank Connector with Excess Flow Protection
    Red Acme-Tank Side

$12.00

 

 

MANC - Manual Tank Changeover Valve Assembly for High Pressure

  MANC

MANC - Manual Tank Changeover Valve Assembly for High Pressure with two 24" high pressure thermoplastic hoses and RED Acme Type-One wrench-less tank connectors with back flow prevention.
( POL's propane tank connectors instead of the Red Acmes are available.)


This assembly will screw into ANY high pressure or low pressure propane regulator. Valve is (2) 1/4" ID female inverted flare x 1/4" Male NPT.


The Optional MANC-SS with two 24" high pressure thermoplastic hoses with a protective Stainless Steel Overbraid and Red Acme wrench-less tank connectors. The added feature of the Stainless Steel Overbraid makes the 24" hoses very strong and almost squirrel-proof.

How does a Manual Tank Changeover Valve Assembly work?
The changeover valve will assemble into any high pressure or low pressure propane regulator.  Using two propane tanks and one tank goes empty, just turn the yellow lever to the full tank. Close the tank valve and unscrew that Red Acme now you are free to remove the empty tank for replacement. A simple solution when running out of gas at the wrong time.

We offer free shipping to 48 U.S. States. Wt. 2#.

  • Manual Tank Changeover Valve Assembly for High Pressure with Stainless Steel Overbraid Hoses
    MANC-SS
  • MANC with Stainless Steel Overbraid Hoses on a High Pressure Regulator
    MANC-SS Installed on a COMRI
    -60 High Pressure Regulator.
  • Manual Tank Changeover Valve Assembly for High Pressure with POL's
    MANC-SS with POL's
  • Manual Tank Changeover Valve Assembly for High Pressure
    MANC
  • Manual Tank Changeover Valve Assembly on a High Pressure Regulator
    MANC Installed on a
    COM3 High Pressure Regulator.
  • Manual Tank Changeover Valve Assembly for High Pressure with POL's
    MANC with POL's

 

$49.95

 

 

COM1 - 10 PSI High Pressure PRESET Regulator

  COM1

COM1 -  10 PSI High Pressure PRESET Regulator Assembly with a
POL tank fitting and a 1/4"ID UL approved hose.

Appropriate for outdoor cooking appliances such as cookers or cast iron burners.

QDC - Optional Quick Disconnect High Pressure Hose Combination Set
is available at an additional charge.

Red Acme Optional Type 1 tank fitting is available at an additional charge.


We offer free shipping to 48 U.S. States. Wt. 2# (with a 5 ft hose).
 

  • 10 PSI High Pressure PRESET Regulator with Optional Stainless Steel hose
    COM1 with Optional Stainless Steel hose
  • 10 PSI High Pressure PRESET Regulator10 PSI High Pressure PRESET Regulator  with Optional Red Acme fitting and QDC hose
    COM1 with Optional Red Acme fitting
    and QDC hose

 

$34.95

 

 

COM1-UL - 10 PSI High Pressure PRESET Regulator with UL-Approved Ball Valve

  COM1- UL

COM1-UL - 10 PSI High Pressure PRESET Regulator Assembly with a
POL tank fitting, a UL-approved Ball Valve, and a 1/4"ID hose.

Appropriate for outdoor cooking appliances such as cookers or cast iron burners.

QDC - Optional Quick Disconnect High Pressure Hose Combination Set
is available at an additional charge.

Red Acme Optional Type 1 tank fitting is available at an additional charge.


We offer free shipping to 48 U.S. States. Wt. 2# (with a 5 ft hose).

 

  • 10 PSI High Pressure PRESET Regulator with UL-Approved Ball Valve with Optional Stainless Steel hose
    COM1-UL with Optional Stainless Steel hose
  • 10 PSI High Pressure PRESET Regulator with UL-Approved Ball Valve with Optional Red Acme fitting and QDC hose
    COM1-UL with Optional Red Acme fitting
    and QDC hose

 

$45.95

 

 

COM3 - 20 PSI High Pressure PRESET Regulator with Needle Valve

  COM3

COM3 - 20 PSI High Pressure PRESET Regulator Assembly with a POL
tank fitting, a fine adjustment Needle Valve, and a 1/4"ID hose.

Appropriate for outdoor cooking appliances such as cookers or cast iron burners.

QDC - Optional Quick Disconnect High Pressure Hose Combination Set
is available at an additional charge.

Red Acme Optional Type 1 tank fitting is available at an additional charge.


We offer free shipping to 48 U.S. States. Wt. 2# (with a 5 ft hose).


  • 20 PSI High Pressure PRESET Regulator with Needle Valve and Optional Stainless Steel hose
    COM3 with Optional Stainless Steel hose
  • 20 PSI High Pressure PRESET Regulator with Needle Valve and Optional Red Acme fitting and QDC hose
    COM3 with Optional Red Acme fitting
    and QDC hose

 

$39.95

 

 

COM4-D - 20 PSI High Pressure PRESET Regulator with Dual Hose Combination

  COM4-D

COM4-D -  20 PSI High Pressure PRESET Regulator Assembly with a POL
tank fitting, (2) needle valves and (2) 1/4"ID hoses.

QDC - Optional Quick Disconnect High Pressure Hose Combination Set
is available at an additional charge.

Red Acme Optional Type 1 tank fitting is available at an additional charge.


We offer free shipping to 48 U.S. States. Wt. 3# (with 5 ft hoses).



  • 20 PSI High Pressure PRESET Regulator with Dual Hose Combination and Optional Stainless Steel hoses
    COM4-D with Optional Stainless Steel hoses
  • 20 PSI High Pressure PRESET Regulator with Dual Hose Combination and Optional Red Acme fitting and QDC hoses
    COM4-D with Optional Red Acme fitting
    and QDC hoses

 

$59.95

 

 

COM2-20 - 0-20 PSI High Pressure ADJUSTABLE Regulator

  COM2-20

COM2-20 - (0-20 psi) High Pressure ADJUSTABLE Regulator Assembly
with a POL tank fitting and a 1/4"ID hose.

Appropriate for outdoor cooking appliances such as cookers or cast iron burners when more propane gas flow is necessary than usual.

QDC - Optional Quick Disconnect High Pressure Hose Combination Set
is available at an additional charge.

Red Acme Optional Type 1 tank fitting is available at an additional charge.


We offer free shipping to 48 U.S. States. Wt. 2# (with a 5 ft hose).

  • 0-20 PSI High Pressure ADJUSTABLE Regulator Assembly with Optional Stainless Steel hose
    COM2-20 with Optional Stainless Steel hose
  • 0-20 PSI High Pressure ADJUSTABLE Regulator Assembly with Optional Red Acme fitting and QDC hose
    COM2-20 with Optional Red Acme fitting
    and QDC hose

 

$45.95

 

 

COM2-30 - 0-30 PSI High Pressure ADJUSTABLE Regulator

  COM2-30

COM2-30 - (0-30 psi) High Pressure ADJUSTABLE Regulator Assembly
with a POL tank fitting and a 1/4"ID hose.

Appropriate for outdoor cooking appliances such as cookers or cast iron burners when more propane gas flow is necessary than usual.

QDC - Optional Quick Disconnect High Pressure Hose Combination Set
is available at an additional charge.

Red Acme Optional Type 1 tank fitting is available at an additional charge.


We offer free shipping to 48 U.S. States. Wt. 2# (with a 5 ft hose).

 

$49.95

 

 

COM2-60 - 0-60 PSI High Pressure ADJUSTABLE Regulator

  COM2-60

COM2-60 - (0-60 psi) High Pressure ADJUSTABLE Regulator Assembly
with a POL tank fitting and a 1/4"ID hose.

Appropriate for outdoor cooking appliances such as cookers or cast iron burners when more propane gas flow is necessary than usual.

QDC - Optional Quick Disconnect High Pressure Hose Combination Set
is available at an additional charge.

Red Acme Optional Type 1 tank fitting is available at an additional charge.


We offer free shipping to 48 U.S. States. Wt. 2# (with a 5 ft hose).

 

$54.95

 

 

COMRI-20 - 0-20 PSI High Pressure ADJUSTABLE Regulator with Gauge

  COMRI-20

COMRI-20 - 0-20 PSI High Pressure ADJUSTABLE Regulator with Pressure Gauge Assembly, includes a POL tank fitting, a PSI gauge and a 1/4"ID hose.


Why would I want a Pressure Gauge on a High Pressure Regulator?

The pressure gauge allows you to make note of the flame setting being used by reading how much PSI you are using.  For example: some cooks prefer to dial in "Low", "Medium", and "High" to REPEATABLE heat outputs.  This particularly way is very important when multiple cooks are involved in a catering situation. This takes the guessing part out of what is a standard "Low", "Medium", or "High" heat setting.


Good for adjusting the gas flow to a repeatable setting. For this regulator will have a pressure gauge from 0-30 PSI. This can lower the chances of damage to the sensitive gauge when gas pressure instantly changes by "pinging" the gauge mechanism and permanently rendering the future readings incorrect.

QDC - Optional Quick Disconnect High Pressure Hose Combination Set
is available at an additional charge.

Red Acme Optional Type 1 tank fitting is available at an additional charge.


We offer free shipping to 48 U.S. States. Wt. 3# (with a 5 ft hose).


  • COMRI-20 with Optional Stainless Steel hose
    COMRI-20 with Optional Stainless Steel hose
  • COMRI-20 with Optional Red Acme fitting and QDC hose
    COMRI-20 with Optional Red Acme fitting
    and QDC hose

 

$54.95

 

 

COMRI-30 - 0-30 PSI High Pressure ADJUSTABLE Regulator with Gauge

  COMRI-30

COMRI-30 - 0-30 PSI High Pressure ADJUSTABLE Regulator with Pressure Gauge Assembly, includes a POL tank fitting, a PSI gauge and a 1/4"ID hose.

Good for adjusting the gas flow to a repeatable setting. For this regulator will have a pressure gauge from 0-60 PSI. This can lower the chances of damage to the sensitive gauge when gas pressure instantly changes by "pinging" the gauge mechanism and permanently rendering the future readings incorrect.

QDC - Optional Quick Disconnect High Pressure Hose Combination Set
is available at an additional charge.

Red Acme Optional Type 1 tank fitting is available at an additional charge.


We offer free shipping to 48 U.S. States. Wt. 3# (with a 5 ft hose).

 

$57.95

 

 

COMRI-60 - 0-60 PSI High Pressure ADJUSTABLE Regulator with Gauge

  COMRI-60

COMRI-60 - 0-60 PSI High Pressure ADJUSTABLE Regulator with Pressure Gauge Assembly, includes a POL tank fitting, a PSI gauge and a 1/4"ID hose.

Good for adjusting the gas flow to a repeatable setting. For this regulator will have a pressure gauge from 0-100 PSI. This can lower the chances of damage to the sensitive gauge when gas pressure instantly changes by "pinging" the gauge mechanism and permanently rendering the future readings incorrect.

QDC - Optional Quick Disconnect High Pressure Hose Combination Set
is available at an additional charge.

Red Acme Optional Type 1 tank fitting is available at an additional charge.


We offer free shipping to 48 U.S. States. Wt. 3# (with a 5 ft hose).

 

$60.95

 

 

QDC - 1/4" ID Quick Disconnect Hose for High Pressure, COMBINATION SET

  QDC

QDC - 1/4" ID Quick Disconnect Hose for High Pressure, Combination Set
QD hose  1/4" Male NPT x 1/4" Female Model 5LPN Socket and a PT9
which is a 9" Pigtail, 3/8" Female Gas Flare Swivel x 5LPN QD Male Plug.


●   Pressure classification of 250 PSI.
●   Includes Dust Plug.
●   Available lengths in 5', 10', 15', and 20'.
●   With the purchase of a QDC and a regulator we will automaticlty install
     the QDC to the regulator at no extra charge.

●   Usually Not for Campers or RV's.

●   Not Suitable for 1/4"ID Low Pressure Quick Disconnect fittings.

●  The PT9 "PIGTAIL" it is intended to remain on the gas appliance
    and
when needed to connect to any QD gas supply hose.
There is safety
    valve inside the Sturgis female 5LPN socket on the QD hose. Disconnect
    the QD hose from the PT9 and the propane gas is automatically shut off.


Weights:
  5 ft Combo       14 oz
10 ft Combo    1# 5 oz
15 ft Combo  1# 11 oz
20 ft Combo    2# 1 oz


We offer free shipping to 48 U.S. States.

 

$37.95

 

 

QD - 1/4" ID Quick Disconnect Hose for High Pressure, 1/4" Male NPT x 1/4" Female Socket

  QD

QD - 1/4" ID (Inner Diameter) Quick Disconnect Hose for High Pressure,
1/4" Male NPT x 1/4" Female Model 5LPN Socket.


●   Pressure classification of 250 PSI.
●   Includes Dust Plug.
●   Available lengths in 5', 10', 15', and 20'.
●   Usually Not for Campers or RV's.

●   Not Suitable with 1/4"ID Low Pressure Quick Disconnect fittings.


Weights:
  5 ft       11 oz
10 ft    1# 2 oz
15 ft    1# 8 oz
20 ft  1# 14 oz


We offer free shipping to 48 U.S. States.

 

$25.95

 

 

PT9 - 9" Pig Tail 1/4" ID Hose for High Pressure, 3/8" Female Gas Flare x Model 5LPN QD Male Plug

  PT9

PT9 - 9" Pig Tail 1/4" ID Hose for High Pressure,
3/8" Female Gas Flare Swivel x Model 5LPN QD Male Plug.


●   Total Length  9".
●   Pressure classification of 250 PSI.
●   Includes Dust Plug.
●   Usually Not for Campers or RV's.

●   Not Suitable with 1/4"ID Low Pressure Quick Disconnect fittings.

●  The PT9 "PIGTAIL" it is intended to remain on the gas appliance
    and
when needed to connect to any QD gas supply hose.


Why use a Quick Disconnect Hose?

The benefits of using a pigtail quick disconnect is that this keeps most of the torque from the weight and pull of the entire gas hose off the gas appliance connection.  It distributes the "pull" along the entire length of the pigtail.  If the quick disconnect fitting is nine inches further away from the appliance also makes it easier to connect and disconnnect the quick disconnect fittings.  You could keep a pigtail on each of your gas appliances and quick connect them whenever needed. 


We offer free shipping to 48 U.S. States. Wt. 3 oz.

$14.95

 

 

104061 - 1/4" ID Quick Disconnect Female Socket for High Pressure, 1/4" Female NPT x Female QD Socket

  104061

104061 - 1/4" ID Quick Disconnect Female Socket for High Pressure,
1/4" Female NPT x Female Model 5LPN QD Socket.


●   Total Length  2".
●   Pressure classification of 250 PSI.
●   Includes Dust Plug.
●   Usually Not for Campers or RV's.

●   Not Suitable with 1/4"ID Low Pressure Quick Disconnect fittings.


We offer free shipping to 48 U.S. States. Wt. 4 oz.

$19.95

 

 

104507 - 1/4" ID Quick Disconnect Ball Valve Female Socket for High Pressure, 1/4" Female NPT x Female QD Socket

  104507

104507 - 1/4" ID QD Ball Valve Female Socket for High Pressure,
1/4" Female NPT x Female Model 5LPN QD Ball Valve Socket.


●   Total Length  2 1/2".
●   Pressure classification of 250 PSI.
●   Includes Dust Plug.
●   Usually Not for Campers or RV's.

●   Not Suitable with 1/4"ID Low Pressure Quick Disconnect fittings.


We offer free shipping to 48 U.S. States. Wt. 5 oz.

$29.95

 

 

401111 - 1/4" ID Quick Disconnect Male Plug for High Pressure, 1/4" Male NPT x Model 5LPN QD Male Plug

  401111

401111 - 1/4" ID Quick Disconnect Male Plug for High Pressure,
1/4" Male NPT x Model 5LPN QD Male Plug.


●   Total Length 1 1/2".
●   Pressure classification of 250 PSI.
●   Includes Dust Cap.

●   Usually Not for Campers or RV's.
●   Not Suitable with 1/4"ID Low Pressure Quick Disconnect fittings.


We offer free shipping to 48 U.S. States. Wt. 1 oz.

$9.95

 

 

Call our propane gas regulator specialists if you need assistance.  713.222.6095.  We have high pressure propane gas regulators for practically any situation and we ship even to Australia!