COM5 - 11" WC Low Pressure PRESET Regulator Assembly

COM5

COM5 - 11" WC Low Pressure PRESET Regulator Assembly with a POL tank fitting and a 3/8" ID UL approved AGA hose, with 3/8" Female SAE gas flare swivel end fitting.

■ 160,000 btu/hr Maximum Output.

■ Green Acme Optional tank fitting is available at an additional charge.

We offer free shipping to 48 U.S. States. Wt. 2#. (with a 5 ft hose).

$49.95

11" WC Low Pressure PRESET propane regulator Assembly with a POL tank fitting and a 3/8" ID UL approved hose

COM5-UL - 11" WC Low Pressure PRESET Regulator with Ball Valve

COM5-UL

COM5-UL - 11" WC Low Pressure PRESET Regulator Assembly with a POL tank fitting, Ball Valve to control the gas and a 3/8" ID UL approved AGA hose, with 3/8" Female SAE gas flare swivel end fitting.

■ 160,000 btu/hr Maximum Output.

■ Green Acme Optional tank fitting is available at an additional charge.

We offer free shipping to 48 U.S. States. Wt. 2#. (with a 5 ft hose).

$69.95

11" WC Low Pressure PRESET propane regulator with a POL tank fitting, UL- approved Ball Valve and a 3/8" ID UL approved hose

COM5-GRN - 11" WC Low Pressure PRESET Regulator with Green Acme Type 1 Tank Connector

COM5-GRN

COM5-GRN - 11" WC Low Pressure PRESET Regulator Assembly with
a Green Acme Type 1 tank fitting and a 3/8" ID UL approved AGA hose,
with 3/8" Female SAE gas flare swivel end fitting.

■ 160,000 btu/hr Maximum Output.

We offer free shipping to 48 U.S. States. Wt. 2#. (with a 5 ft hose).

$59.95

11" WC Low Pressure PRESET propane regulator with a Green Acme Type 1 Tank Connector and a 3/8" ID UL approved hose

COM5-GRN-UL - 11" WC Low Pressure PRESET Regulator with Ball Valve and Green Acme Type 1 Tank Connector

COM5-GRN-UL

COM5-GRN-UL - 11" WC Low Pressure PRESET Regulator Assembly with a Green Acme Type 1 tank fitting, Ball Valve to control the gas, 3/8" ID UL approved AGA hose, with 3/8" Female SAE gas flare swivel end fitting.

■ 160,000 btu/hr Maximum Output.

We offer free shipping to 48 U.S. States. Wt. 2#. (with a 5 ft hose).

$79.95

11" WC Low Pressure PRESET propane regulator with a Green Acme Type 1 Tank Connector, UL-approved Ball Valve and a 3/8" ID UL approved hose

COM5-D - 11" WC Low Pressure PRESET Regulator with Dual Hose

COM5-D

COM5-D - 11" WC Low Pressure PRESET Regulator Assembly with a POL
tank fitting, (2) Ball Valves to control the gas through each hose and
(2) 3/8" ID UL approved AGA hoses, each with 3/8" F SAE end fittings.

■ 160,000 btu/hr Maximum Output.

■ Green Acme Optional tank fitting is available at an additional charge.

We offer free shipping to 48 U.S. States. Wt. 3#. (with 5 ft hoses).

$129.95

11" WC Low Pressure PRESET propane regulator with a POL tank fitting, (2) UL-approved Ball Valves and (2) 3/8" ID UL approved hose

COM5-D-GRN - 11" WC Low Pressure PRESET Regulator with Dual Hose and Green Acme Type 1 Tank Connector

COM5-D-GRN

COM5-D-GRN - 11" WC Low Pressure PRESET Regulator Assembly with a Green Acme Type 1 tank fitting, (2) Ball Valves to control the gas through each hose and (2) 3/8" ID UL approved AGA hoses, each with 3/8" Female SAE gas flare swivel end fittings.

■ 160,000 btu/hr Maximum Output.

We offer free shipping to 48 U.S. States. Wt. 3#. (with 5 ft hoses).

$139.95

11" WC Low Pressure PRESET propane regulator with (2) UL-approved Ball Valves, (2) 3/8" ID UL approved hose and Green Acme Type 1 Tank Connector

PBM125 - 1 1/4" ID Pipe Burners and Venturi, (with Optional support Legs)

PBM125

PBM125 - 1 1/4" ID Pipe Burners and Venturi, (with Optional support Legs)

● Burners are for High Pressure, Low Pressure Propane or Natural Gas,
   include a 1 1/4" Female NPT venturi and a welded cap on the other end.
● We stock (4) different lengths of pipe burners 32", 44", 56" and 68" which
    are measured from the threads of the pipe burner to the opposite end.
● The burners are 1.25" ID (Inside Diameter) and 1.5" OD
    (Outside Diameter) with the thickness of a standard schedule 40 pipe.
● Our pipe burners are designed to be easily light and they are tested to
    give a blue even flame all across the length of the pipe burner.
● From the theads of the burner to the first drilled hole there is a space of
    8" that does not have any holes for flames this gap is been used as the
    "throat" that is required for the gas and air to mix efficiently in order to
     have a nice blue flame.
● To support the pipe burner we recommend a cradle out of a well
    supported length of angle iron, it will also help for easy an removal
    of the burner for cleaning.

We also have the Option of customized support LEGS which are 1/2" diameter round support legs with or without a flat bar which can be welded permanently to the bottom of the legs.

                                                           Weight    Weight with
                                     LEGS
● PBM125-32, has 32" of total length and 24" of flame     8#        10#
● PBM125-44, has 44" of total lenght and 36" of flame 10#      12#
● PBM125-56, has 56" of total lenght and 48" of flame 12#    15#
● PBM125-68, has 68" of total lenght and 60" of flame 15#    18#

Optional Accesories:

● We recommend our COM3 Regulator for a High Pressure set up.
● We recommend our Regulator COM5 for a Low Pressure set up.
    We recommend our natural gas hoses for a Natural Gas set up.
● The G-CVO Needle Control Valve Orifice.
● Also our G-PILOT Assembly.

● Pipe Burner Video

Pipe Burners are made out of Schedule 40 Black Pipe (Carbon Steel Pipe)

For custom length Stainless Steel pipe burners call for a quote. 713.222.6095

We offer free shipping to 48 U.S. States.

68" Pipe Burner with 1 1/4" FNPT Venturi and Optional CVO Control Valve Orifice (Needle Valve)
32" Pipe Burner with Optional Support Legs
Pipe Burner with Optional G-PILOT Assembly

$299.95

PBMG125 - 1 1/4" ID Pipe Burners with Venturi and Grease Shield (Optional support Legs)

PBMG125

PBMG125 - 1 1/4" ID Pipe Burners with Venturi and Grease Shield
(Optional support Legs)

● Burners are for High Pressure, Low Pressure Propane or Natural Gas,
   include a 1 1/4" Female NPT venturi and a welded cap on the other end.
● We stock (4) different lengths of pipe burners 32", 44", 56" and 68" which
    are measured from the threads of the pipe burner to the opposite end.
● The burners are 1.25" ID (Inside Diameter) and 1.5" OD
    (Outside Diameter) with the thickness of a standard schedule 40 pipe.
● Our pipe burners are designed to be easily light and they are tested to
    give a blue even flame all across the length of the pipe burner.
● From the theads of the burner to the first drilled hole there is a space of
    8" that does not have any holes for flames this gap is been used as the
    "throat" that is required for the gas and air to mix efficiently in order to
     have a nice blue flame.
● To support the pipe burner we recommend a cradle out of a well
    supported length of angle iron, it will also help for easy an removal
    of the burner for cleaning.

We also have the Option of customizing support LEGS which are 1/2" diameter round support legs with or without a flat bar which can be welded permanently to the bottom of the legs.

                                                           Weight    Weight with
                                         GS & LEGS
● PBM125-32, has 32" of total length and 24" of flame 12#          14#
● PBM125-44, has 44" of total lenght and 36" of flame 16#      18#
● PBM125-56, has 56" of total lenght and 48" of flame 20#    22#
● PBM125-68, has 68" of total lenght and 60" of flame 24#    26#

Optional Accesories:

● We recommend our COM3 Regulator for a High Pressure set up.
● We recommend our Regulator COM5 for a Low Pressure set up.
    We recommend our natural gas hoses for a Natural Gas set up.
● The G-CVO Needle Control Valve Orifice.
● Also our G-PILOT Assembly.

● Pipe Burner Video

Pipe Burners are made out of
Schedule 40 Black Pipe
(Carbon Steel Pipe)

For custom length Stainless Steel pipe burners call for a quote. 713.222.6095

We offer free shipping to 48 U.S. States.

32" Pipe Burner with Grease Shield and Optional Support Legs

Pipe Burner with Optional G-PILOT Assembly

$349.95

1 1/4in ID Pipe Burners with Venturi and Grease Shield (Optional support Legs)

LPCAST10-2 - Adjustable Length Neck Cast Iron Low Pressure Propane or Natural Gas Two-Part Burner

LPCAST10-2

LPCAST10-2 - 10" Diameter Burner Head w/ Adjustable Length Neck. Low Pressure Propane or Natural Gas Two-Part Burner (100,000 BTU/hr)

● Designed for the burner head to be placed inside the burning area
and the venturi to be placed on the outside of the system or away
from the burning area, which the distance in between is
determined by the length of a 1 1/4" black pipe nipple been used.
● Venturi and Burner head have 1 1/4" Female Normal Pipe Threads.
● The burner head has (4) 8mm mounting bolts to the sides of the burner.
● The diameter of the burner head is 10" and the height is 5".
● We recommend a distance of 2" from burner to the bottom of pot.

● Provides a maximum output of 100,000 BTU/hr.
● Includes a 90° 3/8" flare Orifice, air shutter, and Insect Screen Guard
Or by request a 180° 3/8" flare orifice fitting is also available.
● 1 1/4" ID Pipe Nipple is NOT included. Pipe nipple must be at least 4".

Optional Accesories:

● We recommend our Regulator COM5 for low pressure propane
● We recommend our natural gas hoses for a natural gas set up.
● The G-CVO Needle Control Valve Orifice.
● Also our G-PILOT Assembly.

We offer free shipping to 48 U.S. States. Wt. 15#.

LPCAST10-2 with Optional CVO Needle Valve Orifice
Bottom view of the LPCAST10-2
LPCAST10-2

$249.95

10in Diameter Burner Head with Adjustable Length Neck Cast Iron Low Pressure Propane or Natural Gas Two-Part Burner

LPCAST8-2 - Adjustable Length Neck Cast Iron Low Pressure Propane or Natural Gas Two-Part Burner

LPCAST8-2

LPCAST8-2 - 8" Diameter Burner Head - Adjustable Length Neck & Height Cast Iron Low Pressure Propane or Natural Gas Two-Part Burner. (80,000 BTU/hr). Home brewers love this versatile burner.

● Designed for the burner head to be placed inside the burning area
and the venturi to be placed on the outside of the system or away
from the burning area, which the distance in between is
determined by the length of a 1 1/4" black pipe nipple been used.
● Venturi and Burner head have 1 1/4" Female Normal Pipe Threads.
● The burner head has (4) 6mm mounting bolts to the sides of the burner.
● The diameter of the burner head is 8" and the height is 6".
● We recommend a distance of 2" from burner to the bottom of pot.

● Provides a maximum output of 80,000 BTU/hr.
● Includes a 90° 3/8" flare Orifice, air shutter, and Insect Screen Guard
Or by request a 180° 3/8" flare orifice fitting is also available.
● 1 1/4" ID Pipe Nipple is NOT included. Pipe nipple must be at least 4".
● This burner is our own design and is not available elsewhere.

Optional Accesories:

● We recommend our Regulator COM5 for low pressure propane
● We recommend our natural gas hoses for a natural gas set up.
● The G-CVO Needle Control Valve Orifice.
● Also our G-PILOT Assembly.

We offer free shipping to 48 U.S. States. Wt. 12#.

LPCAST8-2 with standard 90º brass orifice
LPCAST8-2 with Optional CVO250
Bottom view of the LPCAST8-2
Novel design of LPCAST8-2 casting permits a pipe nipple of any length to enter from below

$199.95

8in Diameter Burner Head with Adjustable Length Neck Cast Iron Low Pressure Propane or Natural Gas Two-Part Burner

LPCAST10 - 10" Neck Cast Iron Low Pressure Propane or Natural Gas Burner

LPCAST10

LPCAST10 - 10" Diameter Burner Head with 10" Neck Cast Iron
Low Pressure Propane or Natural Gas Burner. (100,000 BTU/hr)

● The burner head has (4) 8mm mounting bolts to the sides of the burner.
● From the edge of the air inlet to the center of the burner is 10".
● From the orifice to the center of the burner is 11".
● The total length of the burner with an orifice is 17".
● The diameter of the burner head is 10" and the height is 5".
● We recommend a distance of 2" from burner to the bottom of pot.

● Provides a maximum output of 100,000 BTU/hr
● Proprietary cast mold designed for consistent high performance.
● Includes a 90° 3/8" flare Orifice, air shutter, and Insect Screen Guard
Or by request a 180° 3/8" flare orifice fitting is also available.

Optional Accesories:

● We recommend our Regulator COM5 for low pressure propane
● We recommend our natural gas hoses for a natural gas set up.
● The G-CVO Needle Control Valve Orifice.
● Also our G-PILOT Assembly.

We offer free shipping to 48 U.S. States. Wt. 14#.

LPCAST10 with Optional CVO Needle Valve Orifice
Bottom view of the LPCAST10

$149.95

10in Diameter Burner Head with 10in Neck Cast Iron Low Pressure Propane or Natural Gas Burner

CSB1-COM - Cooker Stand COMBO, Single Burner

CSB1-COM

CSB1-COM - Cooker Stand COMBO, Single Burner. For High Pressure,
Low Pressure or Natural Gas. Includes (4) Leg Extensions, Wind Guard,
(2) WINGS and Regulator Assembly or 5ft Natural Gas Hose.

This Cooker Stand has a cook top of 8 spokes the surface its 15" x 15"
and the height of 15". The CS1 its a dual height stand of 15" or 30".
Includes (4) removable legs that will provide the stand to be 30" in height.
It also comes with a burner of your choice for High Pressure Propane,
Low Pressure Propane or Natural Gas. In the burner there is a CVO125
(Control Valve Orifice) to adjust the flame directly from the burner.

COMBO includes: 8" high WG1 folding Wind Guard, (2) 12" x 14" WING
Side Table Extensions and a propane regulator assembly according to the
set up you chose high pressure or low pressure or a 5ft natural gas hose.
(COMBO setup saves almost $23.00 over buying all the items separately!)

● High Pressure Propane, with (1) HPCAST6 Burner (160,000 btu/hr).
   Includes a COM1 Regulator for a high pressure set up.

● Low Pressure Propane, with (1) LPCAST Burner (40,000 btu/hr).
   Includes a COM5 Regulator for a low pressure set up.

● Natural Gas, with (1) LPCAST Burner (40,000 btu/hr).
   Includes a 5' - 3/8"ID natural gas hoses  for a natural gas set up.

Optional Accessories:

Check out our Small GRIDDLES and our BACON PRESS.
Also the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
And the 7CSB1,, Single Burner Cooker Stand Heavy Duty Cover.

15"L x 15"W x 15"H, with the legs installed 15"L x 15"W x 30"H.
We offer free shipping to 48 U.S. States. Wt. 46#.

The CSB1H-COM Base Unit Can Be Used As a Cooker Stand and
Placed either on the Ground or on an Elevated Fireproof Surface

$800.00

Cooker Stand COMBO, Single Burner. For High Pressure, Low Pressure or Natural Gas. Includes (4) Leg Extensions, Wind Guard, (2) WINGS and Regulator Assembly or 5ft Natural Gas Hose.

A125AM - 1 1/4" Cast Aluminum Venturi Gas and Air Mixer

A125AM

OUT OF STOCK

PLEASE NOTE:

We will have more in stock by
JANUARY 2025

You can still order them right now as Pre-Order,
but keep in mind they will be shipping out until
JANUARY 2025.

A125AM - 1 1/4" Cast Aluminum MONSTER Venturi Gs and Air Mixer.

- Aluminum Casting Made in Houston, Texas. Made-in-U.S.A.

- It has a 1 1/4" Female Normal Pipe Thread Outlet.

- No Rust, Light Weight and No Paint Needed.

- To be used with High Pressure / Low Pressure Propane or
Natural Gas.

- The flat top surface is 4" in Diameter by 2 1/2" in height.
- The height of the venturi with an orifice is approximately 4".

- Includes an Aluminum Air Shutter, Insect Screen Guard and a
90 3/8" Flare Orifice, with #61 Orifice for High Pressure Propane.

- Alternatively, a 180 3/8" Flare Orifice fitting is also available.
- Drilled to custom orifice size depending on your specified fuel and
length of pipe burner or specified burner at No Extra Charge.

(For alternative orifice or custom drilled orifice please let us know the
information in comment box section when added to shopping cart).

For High Pressure use we recommend the COM3 regulator/hose.

For Low Pressure use we recommend the COM5 regulator/hose.

The Optional CVO Needle Control Valve with Orifice.

Also available with a G-Pilot Assembly.

Weight 1#. Free Shipping within the 48 contiguous U.S. States.

$149.95

A125AM - 1 1/4" Cast Aluminum Venturi Gas and Air Mixer

CSB1 - Cooker Stand, Single Gas Burner Outdoor Picnic Cooking Stand Stove

CSB1

CSB1 - Cooker Stand Single Gas Burner Outdoor Picnic Cooking Stand Stove. For High Pressure, Low Pressure or Natural Gas. Includes (4) Leg Extensions.

This Cooker Stand has a cook top of 8 spokes the surface its 15" x 15"
and the height of 15". The CSB1 its a dual height stand of 15" or 30".
Includes (4) removable legs that will provide the stand to be 30" in height.
It also comes with a burner of your choice for High Pressure Propane,
Low Pressure Propane or Natural Gas. In the burner there is a CVO125
(Control Valve Orifice) to adjust the flame directly from the burner.

● High Pressure Propane, with (1) HPCAST6 Burner (160,000 btu/hr).
   We recommend our COM1 Regulator for a high pressure set up.

● Low Pressure Propane, with (1) LPCAST Burner (40,000 btu/hr).
   We recommend our COM5 Regulator for a low pressure set up.

● Natural Gas, with (1) LPCAST Burner (40,000 btu/hr).
   We recommend our natural gas hoses for a natural gas set up.

Optional Accessories:

The Optional WING side table extensions work well with this unit and the
Optional WG1, 8" high single burner folding Wind Guard is available.
Check out the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
Also the Small GRIDDLES and our BACON PRESS.
And the 7CSB1, Single Burner Cooker Stand Heavy Duty Cover.

15"L x 15"W x 15"H, with the legs installed 15"L x 15"W x 30"H.
We offer free shipping to 48 U.S. States. Wt. 27#.

CSB1H shown without the (4) Leg
Extensions Which Are Included

$450.00

CSB2 - Cooker Stand, Double Gas Burner Outdoor Camping Cooking Stand Stove and Picnic Burner

CSB2

CSB2 - Cooker Stand, Double Gas Burner Outdoor Cooking Stand Stove and Picnic Burner, Includes (4) Leg Extensions.

This Double Cooker Stand has a cook top surface of 28" x 14" with
8 spokes over each burner and the height of 15". The CSB2 its a dual
height stand of 15" or 30". Includes (4) removable legs that will provide
the stand to be 30" in height and with a leg storage rack at the rear end
of the unit. It also comes with burners of your choice for High Pressure
Propane, Low Pressure Propane or Natural Gas. The (2) burners are
assemble together by a brass manifold which each burner will have a
Needle Control Valve with an orifice to adjust the flame directly from the
burner individually, the brass manifold has a 3/8" Male Gas Flare Inlet.
This unit has a front handle to make it more compact and easy to carry,
also to protect the brass manifold during transport.

● High Pressure Propane, with (2) HPCAST6 Burners (160,000 btu/hr).
   We recommend our COM1 Regulator for a high pressure set up.

● Low Pressure Propane, with (2) LPCAST Burners (40,000 btu/hr).
   We recommend our COM5 Regulator for a low pressure set up.

● Natural Gas, with (2) LPCAST Burners (40,000 btu/hr).
   We recommend our natural gas hoses for a natural gas set up.

Optional Accessories:

The Optional WING side table extensions works well with this unit which
could be added to either or both ends. The use of (1) Optional WING
will increase the width of the unit to 40". And the use of (2) Optional Wings
will make the width 52". An Optional WG2, 8" high double burner folding
Wind Guard is available. Check out our Small or Medium Size
GRIDDLES which will be suitable for this unit and our BACON PRESS.
Also the RING1  11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
And the 7CSB2, Double Burner Cooker Stand Heavy Duty Cover.

28"L x 17"W x 15"H, with the legs installed 28"L x 17"W x 30"H.
We offer free shipping to 48 U.S. States. Wt. 46#.

CSB2 Cooker Stand without the Included Leg Extensions Installed
Unit May Be Also Used as a Table Top Hot Plate on a Fire/Heat
Resistant Surface
Leg Storage Rack at the back side of the CSB2

$800.00

CSB2-COM - Cooker Stand COMBO, Double Burner

CSB2-COM

CSB2-COM - Cooker Stand COMBO, Double Burner. For High Pressure,
Low Pressure or Natural Gas. Includes (4) Leg Extensions, Wind Guard,
(2) WINGS and Regulator Assembly or 5ft Natural Gas Hose.

This Double Cooker Stand has a cook top surface of 28" x 14" with
8 spokes over each burner and the height of 15". The CSB2 its a dual
height stand of 15" or 30". Includes (4) removable legs that will provide
the stand to be 30" in height and with a leg storage rack at the rear end
of the unit. It also comes with burners of your choice for High Pressure
Propane, Low Pressure Propane or Natural Gas. The (2) burners are
assemble together by a brass manifold which each burner will have a
Needle Control Valve with an orifice to adjust the flame directly from the
burner individually, the brass manifold has a 3/8" Male Gas Flare Inlet.
This unit has a front handle to make it more compact and easy to carry,
also to protect the brass manifold during transport.

COMBO includes: 8" high WG2 folding Wind Guard, (2) 12" x 14" WING
Side Table Extensions and a propane regulator assembly according to the
set up you chose high pressure or low pressure or a 5ft natural gas hose.
(COMBO setup saves almost $70.00 over buying all the items separately!)

● High Pressure Propane, with (2) HPCAST6 Burner (160,000 btu/hr).
   Includes a COM1 Regulator for a high pressure set up.

● Low Pressure Propane, with (2) LPCAST Burner (40,000 btu/hr).
   Includes a COM5 Regulator for a low pressure set up.

● Natural Gas, with (2) LPCAST Burner (40,000 btu/hr).
   Includes a 5' - 3/8"ID natural gas hoses for a natural gas set up.

Optional Accessories:

Check out our Small and Medium GRIDDLES and our BACON PRESS.
Also the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
And the 7CSB2, Double Burner Cooker Stand Heavy Duty Cover.

28"L x 17"W x 15"H, with the legs installed 28"L x 17"W x 30"H.
We offer free shipping to 48 U.S. States. Wt. 72#.

CS2L-COM Shown with Included WG2 Wind Guard, (2) WING Side Table Extensions,
(4) Leg Extensions, and a COM5 Preset Low Pressure Propane Regulator
CSB2H-COM Shown Disassembled, Includes WG2 Wind Guard, (2) Wing Side Table
Extensions, (4) Leg Extensions, and a COM5 Preset Low Pressure Propane
Regulator. Base Unit May Be Used as a Table Top Hot Plate on a Fire/Heat
Resistant Surface or on the Ground When Using a Very Large Pot
Leg Storage Rack at the back side of the CSB2-COMBO

$1200.00

Cooker Stand COMBO, Double Burner. For High Pressure, Low Pressure or Natural Gas. Includes (4) Leg Extensions, Wind Guard, (2) WINGS and Regulator Assembly or 5 ft Natural Gas Hose.

204GC039 - Green Acme Type 1 Wrench-less Tank Connector

204GC039

204GC039 - GREEN ACME Type 1 Wrench-less Tank Connector

► Full Flow Tank Connector.

► Type 1 Wrench-less x 1/4" M NPT fitting size.

► 500,000 btu/hr Maximum Output. Designed for low pressure
propane regulators (our COM5 series regulators).

► We will install it on the regulator you order. No installation charges.

► Installation requires use of an 11/16" socket, preferably 6 point.

► Green Acme Inlet Tank Fitting Video

We offer free shipping to 48 U.S. States. Wt. 2.7 oz.

Why order a Green Acme tank fitting for your regulator?

The Green Acme Type 1 tank fitting was made to tighten up clockwise using your hand into the propane tank without the requirement of using a wrench. It will screw into almost any standard propane tank except the very large 100# propane tanks.

Green Acme Safety Tank Fitting on
Low Pressure Regulator
Green Acme Back Side
Green Acme Front Side

$20.00

Green Acme Type 1 Wrench-less Tank Connector

MANC - Manual Tank Changeover Valve Assembly for Low Pressure

MANC

MANC - Manual Tank Changeover Valve Assembly for Low Pressure with two 24" high pressure thermoplastic hoses and Green Acme Type-One wrench-less tank connectors with back flow prevention.

(POL tank connectors instead of the Green Acmes are available.)

This assembly will screw into ANY low pressure propane regulator.
Valve is (2) 1/4" ID female inverted flare x 1/4" Male NPT

How does a Manual Tank Changeover Valve Assembly work?
The changeover valve will assemble into any low pressure propane regulator. Using two propane tanks and one tank goes empty, just turn the yellow lever to the full tank. Close the tank valve and unscrew that Green Acme now you are free to remove the empty tank for replacement. A simple solution when running out of gas at the wrong time.

We offer free shipping to 48 U.S. States. Wt. 2#.

MANC with POL's
MANC attached to a
COM5 Low Pressure Regulator
MANC Assembly ready
for attaching to a regulator

$199.95

MANC Manual Changeover Valve Assembly on a Low Pressure Propane Regulator

G-204039 - Acme Tank Fitting, Green Acme Type 1 Connector

G-204039

G-204039 - Acme Tank Fitting, Green ACME Type 1 Safety Connector appliance fitting is a wrench-less, user friendly, right hand connector.

► Type 1 Wrench-less x 1/4" Male NPT / Full Flow Tan Connector.

► For installation it requires a 11/16" socket, preferably 6 point.

► If you order a Regulator and Acme fitting we will install it on the regulator
you order, no extra charge.

► 500,000 btu/hr maximum output capacity.

► Green Acme Inlet Tank Fitting Video

We offer free shipping to 48 U.S. States. Wt. 2.7 oz.

Pictured below, for example, is a Green ACME inlet fitting installed on a COM5-UL regulator assembly.

Green Acme Safety Tank Fitting on Low
Pressure Regulator
Green Acme Reg Side
Green Acme Tank
Side

$20.00

Acme Tank Fitting, Green Acme Type 1 Connector

CSB3 - Cooker Stand, Triple Gas Burner Outdoor Camping Cooking Stand Stove

CSB3

CSB3 - Cooker Stand, Triple Gas Burner Outdoor Camping Cooking Stand Stove, includes (4) leg extensions

This Triple Cooker Stand has a cook top surface of 42" x 14" with
8 spokes over each burner and the height of 15". The CSB3 its a dual
height stand of 15" or 30". Includes (4) removable legs that will provide
the stand to be 30" in height and with a leg storage rack at the rear end
of the unit. It also comes with burners of your choice for High Pressure
Propane, Low Pressure Propane or Natural Gas. The (3) burners are
assemble together by a brass manifold which each burner will have a
Needle Control Valve with an orifice to adjust the flame directly from the
burner individually, the brass manifold has a 3/8" Male Gas Flare Inlet.
This unit has a front handle to make it more compact and easy to carry,
also to protect the brass manifold during transport.

● High Pressure Propane, with (3) HPCAST6 Burners (160,000 btu/hr).
   We recommend our COM1 Regulator for a high pressure set up.

● Low Pressure Propane, with (3) LPCAST Burners (40,000 btu/hr).
   We recommend our COM5 Regulator for a low pressure set up.

● Natural Gas, with (3) LPCAST Burners (40,000 btu/hr).
   We recommend our natural gas hoses for a natural gas set up.

Optional Accessories:

The Optional WING side table extensions works well with this unit which
could be added to either or both ends. The use of (1) Optional WING
will increase the width of the unit to 54". And the use of (2) Optional Wings
will make the width 66". An Optional WG3, 8" high double burner folding
Wind Guard is available. Check out our Small, Medium or Large Size
GRIDDLES which will be suitable for this unit and our BACON PRESS.
Also the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
And the 7CSB3, Triple Burner Cooker Stand Heavy Duty Cover.

42"L x 17"W x 15"H, with the legs installed 42"L x 17"W x 30"H.
We offer free shipping to 48 U.S. States. Wt. 57#.

CSB3H Cooker Stand Shown without the 24" Legs Which Are Included.
This Base Unit Can Be Placed on the Ground or on a Fireproof Table or Countertop
CSB3N Cooker Stand without the 24" Leg Extensions Which Are Included.
This Base Unit Can be placed on the Ground or on a Fireproof/Heat Resistant Table.
Leg Storage Rack at the back side of the CSB3

$1200.00

CSB3-COM - Cooker Stand COMBO, Triple Burner

CSB3-COM

CSB3-COM - Cooker Stand COMBO, Triple Burner. For High Pressure,
Low Pressure or Natural Gas. Includes (4) Leg Extensions, Wind Guard,
(2) WINGS and Regulator Assembly or 5ft Natural Gas Hose.

This Triple Cooker Stand has a cook top surface of 42" x 14" with
8 spokes over each burner and the height of 15". The CS3 its a dual
height stand of 15" or 30". Includes (4) removable legs that will provide
the stand to be 30" in height and with a leg storage rack at the rear end
of the unit. It also comes with burners of your choice for High Pressure
Propane, Low Pressure Propane or Natural Gas. The (3) burners are
assemble together by a brass manifold which each burner will have a
Needle Control Valve with an orifice to adjust the flame directly from the
burner individually, the brass manifold has a 3/8" Male Gas Flare Inlet.
This unit has a front handle to make it more compact and easy to carry,
also to protect the brass manifold during transport.

COMBO includes: 8" high WG3 folding Wind Guard, (2) 12" x 14" WING
Side Table Extensions and a propane regulator assembly according to the
set up you chose high pressure or low pressure or a 5ft natural gas hose.
(COMBO setup saves almost $75.00 over buying all the items separately!)

● High Pressure Propane, with (3) HPCAST6 Burner (160,000 btu/hr).
   Includes a COM1 Regulator for a high pressure set up.

● Low Pressure Propane, with (3) LPCAST Burner (40,000 btu/hr).
   Includes a COM5 Regulator for a low pressure set up.

● Natural Gas, with (3) LPCAST Burner (40,000 btu/hr).
   Includes a 5' natural gas hoses for a natural gas set up.

Optional Accessories:

Check out our GRIDDLES and our BACON PRESS
Also the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
And the 7CSB3, Triple Burner Cooker Stand Heavy Duty Cover.

42"L x 17"W x 15"H, with the legs installed 42"L x 17"W x 30"H.
We offer free shipping to 48 U.S. States. Wt. 75#.

CSB3H-COM Cooker Stand COMBO Includes WG3 Wind Guard, (2) Legs,
(2) WING Side Table Extensions, and COM1 High Pressure Propane Regulator
CSB3L-COM Cooker Stand Shown with Optional Small Griddle and Bacon Press
Leg Storage Rack at the back side of the CSB3-COMBO

$1500.00

Cooker Stand COMBO, Triple Burner. For High Pressure, Low Pressure or Natural Gas. Includes (4) Leg Extensions, Wind Guard, (2) WINGS and Regulator Assembly or 5ft Natural Gas Hose.

CSB10 - Low Pressure Propane or Natural Gas Cooker Stand Series with 10" Diameter 100,000 Btu/hr Burners

CSB10

CSB10 - Low Pressure Propane or Natural Gas Cooker Stand Series
with 10" Diameter Cast Iron (100,000 btu/hr) Burners.
Single, Double or Triple burner models. With (4) Leg Extensions.

Designed for more btu/hr output of a natural gas or low pressure propane use. The CSB10 reaches higher btu/hr levels while still having control of the heat (down to a simmer) with the needle control valves. The 10" wide burner surface gives more heat over a wider area on the bottom of your pans or pots. The CSB10 its a dual height stand of 15" or 30". Includes (4) removable legs that will provide the stand to be 30" in height and with a leg storage rack at the rear end of the unit.

Optional Accessories:

We recommend our COM5 Regulator for a low pressure set up.
We recommend our natural gas hoses for a natural gas set up.
The Optional WING side table extensions work well with this unit and the
Optional 8" high single burner folding Wind Guard is available.
Check out the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
Also the GRIDDLES and our BACON PRESS

Dimensions:

CS10-1 - 15"L x 15"W x 15"H, with the legs installed 15"L x 15"W x 30"H.

We offer free shipping to 48 U.S. States. Wt. 45#

CSB10 Shown without the (4) Legs which are Included

$600.00

Low Pressure Propane or Natural Gas Cooker Stand Series with 10" Diameter 100,000 Btu/hr Burners

CSB10-COM - Low Pressure or Natural Gas Cooker Stand COMBO Series with 10" Diameter 100,000 Btu/hr Burners

CSB10-COM

CSB10-COM - Low Pressure Propane or Natural Gas Cooker Stand COMBO
Series with 10" Diameter Cast Iron (100,000 btu/hr) Burners. Includes
(4) Leg Extensions, Wind Guard, (2) WINGS and Regulator Assembly or
5ft Natural Gas Hose.

Designed for more btu/hr output of a natural gas or low pressure propane use. The CSB10 reaches higher btu/hr levels while still having control of the heat (down to a simmer) with the needle control valves. The 10" wide burner surface gives more heat over a wider area on the bottom of your pans or pots. The CSB10 its a dual height stand of 15" or 30". Includes (4) removable legs that will provide the stand to be 30" in height and with a leg storage rack at the rear end of the unit.

COMBO includes: 8" high folding Wind Guard, (2) 12" x 14" WING
Side Table Extensions and a COM5 Regulator or a 5 ft.natural gas hoses .

Optional Accessories:

Check out our GRIDDLES and our BACON PRESS.
Also the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.

Dimensions:

CSB10-1 - 15"L x 15"W x 15"H, with the legs installed 15"L x 15"W x 30"H.

We offer free shipping to 48 U.S. States. Wt. 65#

CSB10-1LCOM Cooker Stand with (4) Leg Extensions, WG1 Wind Guard,
(2) WING Side Table Extensions, and a Low Pressure PRESET Propane Regulator

$900.00

Low Pressure or Natural Gas Cooker Stand COMBO Series with 10" Diameter 100,000 Btu/hr Burners. Includes (4) Leg Extensions, Wind Guard, (2) WINGS and Regulator Assembly or 5ft Natural Gas Hose.

A75AM - 3/4" Cast Aluminum Venturi Air Gas Mixer, with an air shutter, Insect Screen, and the selected orifice fitting.

A75AM

OUT OF STOCK

PLEASE NOTE:

We will have more in stock by January 2025.

You can still order them right now as Pre-Order,
but keep in mind they will be shipping out until
JANUARY 2025.

New Venturi Design

A75AM 3/4" Cast Aluminum Venturi Air Gas Mixer, air shutter, with Insect Screen Guard, and a 90° 3/8" gas flare orifice fitting (or selected orifice type). For use with high or low pressure with the appropriate orifice fitting size.

- Aluminum Casting Made in Houston, Texas. Made-in-U.S.A.

- No Rust, Light Weight and No Paint Needed.

The flat top surface is 3" in diameter by 1-3/4" in height.
The height of the venturi with an orifice is approximately 2-3/4".
Includes an air shutter, Insect Screen Guard, and a 90° 3/8" gas flare orifice fitting. A 180° 3/8" gas flare orifice fitting is also available. Ask.

For High Pressure use we recommend the COM3 regulator/hose.
For Low Pressure use we recommend the COM5 regulator/hose.
The Optional CVO Needle Control Valve with Orifice.
Also available with a T-PILOT Assembly.

Comes with a #61 orifice for High Pressure Propane, OR specify your desired size, and we will custom drill your orifice at no extra charge.

Weight 7 oz. Free shipping within the 48 contiguous U.S. States.

The photos below show the different options which can be choosen from the menu above the price.

Options:

Default A75AM with 90° Orifice, $99.95

A75AM with optional CVO valve orifice, $139.95


A75AM with optional T-PILOT Assembly, $179.95

$99.95

A75AM venturi air gas mixer with 90° Orifice