Home  >  Search Result > Products

 

 

LPCAST8-2 - Adjustable Length Neck Cast Iron Low Pressure Propane or Natural Gas Two-Part Burner

  LPCAST8-2

LPCAST8-2 - 8" Diameter Burner Head - Adjustable Length Neck & Height
Cast Iron Low Pressure Propane or Natural Gas Two-Part Burner.
(80,000 BTU/hr)

  Designed for the burner head to be placed inside the burning area
    and the venturi to be placed on the outside of the system or away
    from the area burning area, which the
distance in between is
    determined by the length of a 1 1/4" black pipe nipple been used.

●  Venturi and Burner head have 1 1/4" Female Normal Pipe Threads.
●  The burner head has (4) 6mm mounting bolts to the sides of the burner.
●  The diameter of the burner head is 8" and the height is 6".
●  We recommend a distance of 2" from burner to the bottom of pot.



●  Provides a maximum output of 80,000 BTU/hr.
●  Includes a 90° 3/8" flare Orifice, air shutter, and Insect Screen Guard
    Or by request a 180° 3/8" flare orifice fitting is also available.
●  1 1/4" ID Pipe Nipple is NOT included. Pipe nipple must be at least 4".

●  This burner is our own design and is not available elsewhere.


Optional Accesories:

●  We recommend our 
Regulator COM5 for low pressure propane
●  We recommend our natural gas hoses for a natural gas set up.
●  The
G-CVO Needle Control Valve Orifice.
●  Also our G-PILOT Assembly.


We offer free shipping to 48 U.S. States. Wt. 12#.

 

  • 80,000 Btu/hr Low Pressure Two Part Cast Iron Burner with Adjustable Lenght Neck
    LPCAST8-2 with standard 90º brass orifice
  • 80,000 Btu/hr Low Pressure Two Part Cast Iron Burner with Control Valve Orifice
    LPCAST8-2 with Optional CVO250
  • 80,000 Btu/hr Low Pressure Two Part Cast Iron Burner with Adjustable Lenght Neck   80,000 Btu/hr Low Pressure Two Part Cast Iron Burner with Adjustable Lenght Neck
    Bottom view of the LPCAST8-2
  • 80,000 Btu/hr Low Pressure Two Part Cast Iron Burner with Control Valve Orifice   80,000 Btu/hr Low Pressure Two Part Cast Iron Burner with Control Valve Orifice
    Novel design of LPCAST8-2 casting permits a pipe nipple of any length to enter from below

 

$124.95

 

 

INSECT2 - 3 1/2" Diameter Large Insect Screen Guard

  INSECT2

INSECT2 - 3 1/2" Diameter Large Insect Screen Guard

● This Large Insect Screen Guard has a diameter of 2 1/2".
● The screen will  prevent insects from nesting inside the burner.

● There is need to purchase an Insect Screen Guard if you are
    purchasing one of our burners since one is already included.

INSECT2 Screen is for the following burners:  
   HPMAX-1, HPMAX-2,
   LPCAST8-2, LPCAST10, LPCAST10-2, LPCAST12-2


We offer free shipping to 48 U.S. States. Wt. 1 oz. 

$2.95

 

 

CSB8 - Low Pressure Propane or Natural Gas Cooker Stand Series with 8" Diameter 80,000 Btu/hr Burners

  CSB8

CSB8 - Low Pressure Propane or Natural Gas Cooker Stand Series
with  8" Diameter Cast Iron (80,000 btu/hr) Burners.
Single, Double or Triple burner models. With (4) Leg Extensions.

 

GasHosesandRegulators.com has design this new cast iron burner which puts out 80,000 btu/hr. Designed for more btu/hr output of a natural gas or low pressure propane use. The CSB8 reaches higher btu/hr levels while still having control of the heat (down to a simmer) with the needle control valves. The 8" wide burner surface gives more heat over a wider area on the bottom of your pans or pots. The CSB8 its a dual height stand of 15" or 30". Includes (4) removable legs that will provide the stand to be 30" in height and with a leg storage rack at the rear end of the unit.



Optional Accessories:

We recommend our 
COM5 Regulator for a low pressure set up.
We recommend our 
natural gas hoses  for a natural gas set up.
The Optional 
WING side table extensions work well with this unit and the

Optional 8" high single burner folding Wind Guard is available. Also available is our 7CSB1, Heavy Duty Cover for this model.

Check out the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
Also the 
GRIDDLES and our BACON PRESS

Dimensions:

CS
8-1 - 15"L x 15"W x 15"H, with the legs installed 15"L x 15"W x 30"H.

CS8-2 - 28"L x 17"W x 15"H, with the legs installed 28"L x 17"W x 30"H

CS8-3 - 42"L x 17"W x 15"H, with the legs installed 42"L x 17"W x 30"H.



We offer free shipping to 48 U.S. States. Wt. 39#, 64# and 88#.
 

  • Single Burner Cooker Stand with a 8in Burner
    CSB8-1L Shown without the (4) Legs Which are Included
  • Double Burner Cooker Stand with 8 inch Burners   Double Burner Cooker Stand with 8 inch Burners
    CSB8-2L Shown with and without the Included Leg Extensions
  • Double Burner Cooker Stand with 8 inch Burners
    Leg Storage Rack at the back side of the CSB8-2
  • Triple Burner Cooker Stand with  8 inch Diameter Burners
    CSB8-3L Shown with the Included Leg Extensions
  • Triple Burner Cooker Stand with a 8in Burners
    Leg Storage Rack at the back side of the CSB8-3

 

$229.95

 

 

CSB8-COM - Low Pressure or Natural Gas Cooker Stand COMBO Series with 8" Diameter 80,000 Btu/hr Burners

  CSB8-COM

CSB8-COM - Low Pressure Propane or Natural Gas Cooker Stand COMBO
Series with  8" Diameter Cast Iron (80,000 btu/hr) Burners. Includes
(4) Leg Extensions, Wind Guard, (2) WINGS and Regulator Assembly or
5ft Natural Gas Hose.
Single, Double or Triple burner models.

 

GasHosesandRegulators.com has design this new cast iron burner which puts out 80,000 btu/hr. Designed for more btu/hr output of a natural gas or low pressure propane use. The CSB8 reaches higher btu/hr levels while still having control of the heat (down to a simmer) with the needle control valves. The 8" wide burner surface gives more heat over a wider area on the bottom of your pans or pots. The CS8 its a dual height stand of 15" or 30". Includes (4) removable legs that will provide the stand to be 30" in height and with a leg storage rack at the rear end of the unit.


COMBO includes: 8" high folding 
Wind Guard, (2) 12" x 14"  WING
Side Table Extensions and a COM5 Regulator  or a 5 ft. natural gas hoses.



Optional Accessories:

Check out our 
GRIDDLES and our BACON PRESS
Also the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.

Dimensions:

CSB
8-1 - 15"L x 15"W x 15"H, with the legs installed 15"L x 15"W x 30"H.

CSB8-2 - 28"L x 17"W x 15"H, with the legs installed 28"L x 17"W x 30"H

CSB8-3 - 42"L x 17"W x 15"H, with the legs installed 42"L x 17"W x 30"H.


We offer free shipping to 48 U.S. States. Wt. 58#, 86# and 114#.


 

  • Single Burner Cooker Stand with a 8 inch Burner COMBO
    CSB8-1L COMBO (2) Wings Side Extensions, COM5 Regulator,
    WG3 Wind Guard and (4) Leg Extensions
  • Triple Burner Cooker Stand with 8 inch Burners COMBO
    CSB8-3LCOM Has (3) 80,000 btu/hr Low Pressure Burners
  • Triple Burner Cooker Stand with a 8 inch Burners
    Leg Storage Rack at the back side of the CSB8-3 COMBO

 

$329.95