Home  >  Search Result > Products

 

 

LPCAST12-2 - Adjustable Length Neck Cast Iron Low Pressure Propane or Natural Gas Two-Part Burner

  LPCAST12-2

LPCAST12-2 - 12" Diameter Burner Head with Adjustable Length Neck
Cast Iron Low Pressure Propane or Natural Gas Two-Part Burner. (120,000 BTU/hr)


  Designed for the burner head to be placed inside the burning area
    and the venturi to be placed on the outside of the system or away
    from the area burning area, which the
distance in between is
    determined by the length of a 1 1/4" black pipe nipple been used.

●  Venturi and Burner head have 1 1/4" Female Normal Pipe Threads.
●  In the bottom of the burner head it has three 1 1/4" small legs,
    each small leg has one 6mm in diameter or a 1/4" mounting bolt.

●  The diameter of the burner head is 12" and the height is 3 1/2".
●  We recommend a distance of 2" from burner to the bottom of pot.



●  Provides a maximum output of 120,000 BTU/hr.
●  Includes a 90° 3/8" flare Orifice, air shutter, and Insect Screen Guard
    Or by request a 180° 3/8" flare orifice fitting is also available.
●  1 1/4" ID Pipe Nipple is NOT included. Pipe nipple must be at least 4".

●  This burner is our own design and is not available elsewhere.


Optional Accesories:

●  We recommend our 
Regulator COM5 for low pressure propane
●  We recommend our natural gas hoses for a natural gas set up.
●  Optional 
G-CVO Needle Control Valve Orifice permits fine control of flames     from a low simmer to a high heat output; doing so right at the burner.  

●  LPCAST12-2 Video


We offer free shipping to 48 U.S. States. Wt. 19#.

 

  • 120,000 Btu/hr Low Pressure Two Part Cast Iron Burner with Adjustable Lenght Neck     LPCAST12-2 with Optional Needle Valve
    LPCAST12-2 with Optional CVO Needle Valve
  • 120,000 Btu/hr Low Pressure Cast Iron Burner Head
    Bottom view of the LPCAST12-2
  • 120,000 Btu/hr Low Pressure Two Part Cast Iron Burner with Adjustable Lenght Neck
    LPCAST12-2 with standard 90º brass orifice
  • 120,000 Btu Burner Low Pressure or Natural Gas with Pilot Assembly   120,000 Btu Burner Low Pressure or Natural Gas with Pilot Assembly
    Pilot Light Assembly Option available at additional charge. 

 

$179.95

 

 

INSECT2 - 3 1/2" Diameter Large Insect Screen Guard

  INSECT2

INSECT2 - 3 1/2" Diameter Large Insect Screen Guard

● This Large Insect Screen Guard has a diameter of 2 1/2".
● The screen will  prevent insects from nesting inside the burner.

● There is need to purchase an Insect Screen Guard if you are
    purchasing one of our burners since one is already included.

INSECT2 Screen is for the following burners:  
   HPMAX-1, HPMAX-2,
   LPCAST8-2, LPCAST10, LPCAST10-2, LPCAST12-2


We offer free shipping to 48 U.S. States. Wt. 1 oz. 

$2.95

 

 

CSB12 - Low Pressure Propane or Natural Gas Single Burner Cooker Stand with a 12" Diameter 120,000 Btu/hr Burner

  CSB12

CSB12 - Low Pressure Propane or Natural Gas Single Burner
Cooker Stand
with a 12" Diameter Cast Iron (120,000 btu/hr) Burner.

This Cooker Stand has a cook top of 8 spokes the surface its 15" x 15"
and the height of 15". The CSB12 its a dual height stand of 15" or 30".
Includes (4) removable legs that will provide the stand to be 30" in height.

Designed for more btu/hr output on natural gas or low pressure propane.
The 12" wide burner surface gives more heat over a wider area on the
bottom of your pans or pots.
The burner comes with a CVO250
(Control Valve Orifice) to adjust the flame directly from the burner.


Optional Accessories:

We recommend our 
COM5 Regulator for a low pressure set up.
We recommend our 
natural gas hoses for a natural gas set up.
The Optional 
WING side table extensions work well with this unit and the
Optional 8" high single burner folding 
Wind Guard is available.
Check out the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
Also the Small 
GRIDDLES and our BACON PRESS.
And the 7CSB12, Single Burner Cooker Stand Heavy Duty Cover.



15"L x 15"W x 15"H, with the legs installed 15"L x 15"W x 30"H.
We offer free shipping to 48 U.S. States. Wt. 47#.

 

  • Single  Burner Cooker Stand with a 12 inch Diameter Burner
    CSB12-N Cooker Stand for Natural Gas Which Outputs
    Up To 120,000 btu/hr! Shown Without the Included Legs
    Also Available for Use with Low Pressure Propane

 

$289.95

 

 

CSB12-COM - Low Pressure or Natural Gas Single Burner Cooker Stand COMBO with a 12" Diameter 120,000 Btu/hr Burner

  CSB12-COM

CSB12-COM - Low Pressure Propane or Natural Gas Single Burner
Cooker Stand COMBO with a 12" Diameter (120,000 btu/hr) Burner.
Includes (4) Leg Extensions, Wind Guard, (2) WINGS and
Regulator Assembly or 5ft Natural Gas Hose.


This Cooker Stand has a cook top of 8 spokes the surface its 15" x 15"
and the height of 15". The CSB12 its a dual height stand of 15" or 30".
Includes (4) removable legs that will provide the stand to be 30" in height.

Designed for more btu/hr output on natural gas or low pressure propane.
The 12" wide burner surface gives more heat over a wider area on the
bottom of your pans or pots.
The burner comes with a CVO250
(Control Valve Orifice) to adjust the flame directly from the burner.

COMBO includes: 8" high folding 
Wind Guard, (2) 12" x 14"  WING
Side Table Extensions and a COM5 Regulator or a 5 ft. natural gas hoses.


Optional Accessories:

Check out our 
GRIDDLES and our BACON PRESS.
Also the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
And the 
7CSB12, Single Burner Cooker Stand Heavy Duty Cover.


15"L x 15"W x 15"H, with the legs installed 15"L x 15"W x 30"H.
We offer free shipping to 48 U.S. States. Wt. 69#.

 

  • Single  Burner Cooker Stand with a 12 inchDiameter Burner COMBO
    CSB12-LCOM Cooker Stand Shown Disassembled. Above
    Burner Is Set Up For Using Low Pressure Propane

 

$389.95