Home  >  Search Result > Products

 

 

HPCAST6 - 6" Neck Cast Iron High Pressure Burner

  HPCAST6

HPCAST6 - 6" Neck Cast Iron High Pressure Burner. (160,000 BTU/hr)

●  The burner has a 6mm in diameter or a 1/4" Center Bolt.
  From the edge of the air inlet to the center bolt the burner is 6 1/4".
●  From the orifice to the center bolt is 7 1/2".
●  The total length of the burner with an orifice is 10".
●  The diameter of the burner head is 4" and the height is 3".
●  We recommend a distance of 3" to 4" from burner to the bottom of pot.

●  Provides a maximum output of 160,000 BTU/hr.
●  Includes a 90° 3/8" flare Orifice, air shutter, and a Insect Screen Guard
    Or by request a 180° 3/8" flare orifice fitting is also available.


Optional Accesories:


●  We recommend our Regulator COM3.
●  Also our 
G-CVO Needle Control Valve Orifice.

We offer free shipping to 48 U.S. States. Wt. 4#.


  • 160,000 Btu/hr High Pressure Cast Iron Burner with 6in Neck   160,000 Btu/hr High Pressure Cast Iron Burner with 6in Neck
    HPCAST6 with Optional CVO Control Valve Orifice
  • 160,000 Btu/hr High Pressure Cast Iron Burner with 6in Neck   160,000 Btu/hr High Pressure Cast Iron Burner with 6in Neck
    Bottom side view of the HPCAST6
  • 160,000 BTU/hr High Pressure Cast Iron Burner with Pilot Assembly   160,000 BTU/hr High Pressure Cast Iron Burner with Pilot Assembly
                Pilot Light Assembly is available as an Option at additional charge

 

$34.95

 

 

INSECT1 - 2 1/2" Diameter Small Insect Screen Guard

  INSECT1

INSECT1 -  2 1/2" Diameter Small Insect Screen Guard

● This Small Insect Screen Guard has a diameter of 2 1/2".
● The screen will  prevent insects from nesting inside the burner.

● There is need to purchase an Insect Screen Guard if you are
    purchasing one of our burners since one is already included.

INSECT1 Screen is for the following burners:  
   LPCAST, LPCAST-2, GRILL-2

   HPOCA4, HPB6, HPCAST6, HPGX-1, HPGX-2

We offer free shipping to 48 U.S. States. Wt. 1 oz. 

$2.95

 

 

CSB1-COM - Cooker Stand COMBO, Single Burner

  CSB1-COM

CSB1-COM - Cooker Stand COMBO, Single Burner. For High Pressure,
Low Pressure or Natural Gas. Includes (4) Leg Extensions, Wind Guard,
(2) WINGS and Regulator Assembly or 5ft Natural Gas Hose.

This Cooker Stand has a cook top of 8 spokes the surface its 15" x 15"
and the height of 15". The CS1 its a dual height stand of 15" or 30".
Includes (4) removable legs that will provide the stand to be 30" in height.
It also comes with a burner of your choice for High Pressure Propane,
Low Pressure Propane or Natural Gas. In the burner there is a CVO125
(Control Valve Orifice) to adjust the flame directly from the burner.


COMBO includes: 8" high WG1 folding Wind Guard, (2) 12" x 14"  WING
Side Table Extensions and a propane regulator assembly according to the
set up you chose high pressure or low pressure or a 5ft natural gas hose.
(COMBO setup saves almost $23.00 over buying all the items separately!) 

● High Pressure Propane, with (1) HPCAST6 Burner (160,000 btu/hr).
   Includes a 
COM1 Regulator for a high pressure set up.

● Low Pressure Propane, with (1) LPCAST Burner (40,000 btu/hr).
   Includes
COM5 Regulator for a low pressure set up.

● Natural Gas, with (1) LPCAST Burner (40,000 btu/hr).
   Includes a 5' - 3/8"ID 
natural gas hoses  for a natural gas set up.


Optional Accessories:


Check out our Small 
GRIDDLES and our BACON PRESS.
Also the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
And the 
7CSB1,, Single Burner Cooker Stand Heavy Duty Cover.


15"L x 15"W x 15"H, with the legs installed 15"L x 15"W x 30"H.

We offer free shipping to 48 U.S. States. Wt. 46#.



  • Single Burner Cooker Stand Combo
    The CSB1H-COM Base Unit Can Be Used As a Cooker Stand and
    Placed either on the Ground or on an Elevated Fireproof Surface

 

$259.95

 

 

CSB1 - Cooker Stand, Single Burner

  CSB1

CSB1 - Cooker Stand Single Burner. For High Pressure, Low Pressure or Natural Gas. Includes (4) Leg Extensions.

This Cooker Stand has a cook top of 8 spokes the surface its 15" x 15"
and the height of 15". The CSB1 its a dual height stand of 15" or 30".
Includes (4) removable legs that will provide the stand to be 30" in height.
It also comes with a burner of your choice for High Pressure Propane,
Low Pressure Propane or Natural Gas. In the burner there is a CVO125
(Control Valve Orifice) to adjust the flame directly from the burner.

● High Pressure Propane, with (1) HPCAST6 Burner (160,000 btu/hr).
   We recommend our 
COM1 Regulator for a high pressure set up.

● Low Pressure Propane, with (1) LPCAST Burner (40,000 btu/hr).
   We recommend our 
COM5 Regulator for a low pressure set up.

● Natural Gas, with (1) LPCAST Burner (40,000 btu/hr).
   We recommend our natural gas hoses for a natural gas set up.


Optional Accessories:

The Optional 
WING side table extensions work well with this unit and the
Optional 
WG1, 8" high single burner folding Wind Guard is available.
Check out the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
Also the Small 
GRIDDLES and our BACON PRESS.
And the 7CSB1, Single Burner Cooker Stand Heavy Duty Cover.



15"L x 15"W x 15"H, with the legs installed 15"L x 15"W x 30"H.
We offer free shipping to 48 U.S. States. Wt. 27#.


 

  • Single Burner Cooker Stand
    CSB1H shown without the (4) Leg
    Extensions Which Are Included

 

$138.95

 

 

CSB2 - Cooker Stand, Double Burner

  CSB2

CSB2 - Cooker Stand, Double Burner. For High Pressure, Low Pressure or Natural Gas. Includes (4) Leg Extensions.

This Double Cooker Stand has a cook top surface of 28" x 14" with
8 spokes over each burner and the height of 15". The CSB2 its a dual
height stand of 15" or 30". Includes (4) removable legs that will provide
the stand to be 30" in height and with a leg storage rack at the rear end
of the unit. It also comes with burners of your choice for High Pressure
Propane, Low Pressure Propane or Natural Gas. The (2) burners are
assemble together by a brass manifold which each burner will have a
Needle Control Valve with an orifice to adjust the flame directly from the
burner individually, the brass manifold has a  3/8" Male Gas Flare Inlet.

This unit has a front handle to make it more compact and easy to carry,
also to protect the brass manifold during transport.

● High Pressure Propane, with (2) HPCAST6 Burners (160,000 btu/hr).
   We recommend our 
COM1 Regulator for a high pressure set up.

● Low Pressure Propane, with (2) LPCAST Burners (40,000 btu/hr).
   We recommend our 
COM5 Regulator for a low pressure set up.

● Natural Gas, with (2) LPCAST Burners (40,000 btu/hr).
   We recommend our 
natural gas hoses for a natural gas set up.


Optional Accessories:

The Optional 
WING side table extensions works well with this unit which
could be added to either or both ends. The use of (1) Optional WING
will increase the width of the unit to 40". And the use of (2) Optional Wings
will make the width 52". An Optional WG2, 8" high double burner folding
Wind Guard is available. Check out our Small or Medium Size

GRIDDLES which will be suitable for this unit and our BACON PRESS.
Also the 
RING1  11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
And the 
7CSB2, Double Burner Cooker Stand Heavy Duty Cover.


28"L x 17"W x 15"H, with the legs installed 28"L x 17"W x 30"H.  
We offer free shipping to 48 U.S. States. Wt. 46#.

 

  • Double Burner Cooker Stand
    CSB2 Cooker Stand without the Included Leg Extensions Installed
    Unit May Be Also Used as a Table Top Hot Plate on a Fire/Heat
    Resistant Surface
  • Double Burner Cooker Stand
    Leg Storage Rack at the back side of the CSB2

 

$229.95

 

 

CSB2-COM - Cooker Stand COMBO, Double Burner

  CSB2-COM

CSB2-COM - Cooker Stand COMBO, Double Burner. For High Pressure,
Low Pressure or Natural Gas. Includes (4) Leg Extensions, Wind Guard,
(2) WINGS and Regulator Assembly or 5ft Natural Gas Hose.


This Double Cooker Stand has a cook top surface of 28" x 14" with
8 spokes over each burner and the height of 15". The CSB2 its a dual
height stand of 15" or 30". Includes (4) removable legs that will provide
the stand to be 30" in height and with a leg storage rack at the rear end
of the unit. It also comes with burners of your choice for High Pressure
Propane, Low Pressure Propane or Natural Gas. The (2) burners are
assemble together by a brass manifold which each burner will have a
Needle Control Valve with an orifice to adjust the flame directly from the
burner individually, the brass manifold has a  3/8" Male Gas Flare Inlet.

This unit has a front handle to make it more compact and easy to carry,
also to protect the brass manifold during transport.

COMBO includes: 8" high 
WG2 folding Wind Guard, (2) 12" x 14"  WING
Side Table Extensions and a propane regulator assembly according to the
set up you chose high pressure or low pressure or a 5ft natural gas hose.
(COMBO setup saves almost $70.00 over buying all the items separately!)


● High Pressure Propane, with (2) HPCAST6 Burner (160,000 btu/hr).
   Includes a 
COM1 Regulator for a high pressure set up.

● Low Pressure Propane, with (2) LPCAST Burner (40,000 btu/hr).
   Includes
COM5 Regulator for a low pressure set up.

● Natural Gas, with (2) LPCAST Burner (40,000 btu/hr).
   Includes a 5' - 3/8"ID 
natural gas hoses for a natural gas set up.


Optional Accessories:


Check out our Small and Medium 
GRIDDLES and our BACON PRESS.
Also the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
And the 
7CSB2, Double Burner Cooker Stand Heavy Duty Cover.


28"L x 17"W x 15"H, with the legs installed 28"L x 17"W x 30"H.
We offer free shipping to 48 U.S. States. Wt. 72#.

 

  • Double Burner Cooker Stand COMBO
    CS2L-COM Shown with Included WG2 Wind Guard, (2) WING Side Table Extensions,
    (4) Leg Extensions, and a COM5 Preset Low Pressure Propane Regulator
  • Double Burner Cooker Stand COMBO
    CSB2H-COM Shown Disassembled, Includes WG2 Wind Guard, (2) Wing Side Table
    Extensions, (4) Leg Extensions, and a COM5 Preset Low Pressure Propane
    Regulator. Base Unit May Be Used as a Table Top Hot Plate on a Fire/Heat
    Resistant Surface or on the Ground When Using a Very Large Pot
  • Double Burner Cooker Stand COMBO
    Leg Storage Rack at the back side of the CSB2-COMBO

 

$319.95

 

 

CSB3 - Cooker Stand, Triple Burner

  CSB3

CSB3 - Cooker Stand, Triple Burner. For High Pressure, Low Pressure or
Natural Gas. Includes (4) Leg Extensions.

This Triple Cooker Stand has a cook top surface of 42" x 14" with
8 spokes over each burner and the height of 15". The CSB3 its a dual
height stand of 15" or 30". Includes (4) removable legs that will provide
the stand to be 30" in height and with a leg storage rack at the rear end
of the unit. It also comes with burners of your choice for High Pressure
Propane, Low Pressure Propane or Natural Gas. The (3) burners are
assemble together by a brass manifold which each burner will have a
Needle Control Valve with an orifice to adjust the flame directly from the
burner individually, the brass manifold has a  3/8" Male Gas Flare Inlet.

This unit has a front handle to make it more compact and easy to carry,
also to protect the brass manifold during transport.

● High Pressure Propane, with (3) HPCAST6 Burners (160,000 btu/hr).
   We recommend our COM1 Regulator for a high pressure set up.


● Low Pressure Propane, with (3) LPCAST Burners (40,000 btu/hr).
   We recommend our COM5 Regulator for a low pressure set up.


● Natural Gas, with (3) LPCAST Burners (40,000 btu/hr).
   We recommend our natural gas hoses for a natural gas set up.


Optional Accessories:

The Optional WING side table extensions works well with this unit which
could be added to either or both ends. The use of (1) Optional WING
will increase the width of the unit to 54". And the use of (2) Optional Wings
will make the width 66". An Optional WG3, 8" high double burner folding
Wind Guard is available. Check out our Small, Medium or Large Size
GRIDDLES which will be suitable for this unit and our 
BACON PRESS.
Also the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
And the 7CSB3, Triple Burner Cooker Stand Heavy Duty Cover.



42"L x 17"W x 15"H, with the legs installed 42"L x 17"W x 30"H.  
We offer free shipping to 48 U.S. States. Wt. 57#.



 

  • Triple Burner Cooker Stand
    CSB3H Cooker Stand Shown without the 24" Legs Which Are Included.
    This Base Unit Can Be Placed on the Ground or on a Fireproof Table or Countertop
  • Triple Burner Cooker Stand
    CSB3N Cooker Stand without the 24" Leg Extensions Which Are Included.
    This Base Unit Can be placed on the Ground or on a Fireproof/Heat Resistant Table.
  • Triple Burner Cooker Stand
    Leg Storage Rack at the back side of the CSB3

 

$339.95

 

 

CSB3-COM - Cooker Stand COMBO, Triple Burner

  CSB3-COM

CSB3-COM - Cooker Stand COMBO, Triple Burner. For High Pressure,
Low Pressure or Natural Gas. Includes (4) Leg Extensions, Wind Guard,
(2) WINGS and Regulator Assembly or 5ft Natural Gas Hose.


This Triple Cooker Stand has a cook top surface of 42" x 14" with
8 spokes over each burner and the height of 15". The CS3 its a dual
height stand of 15" or 30". Includes (4) removable legs that will provide
the stand to be 30" in height and with a leg storage rack at the rear end
of the unit. It also comes with burners of your choice for High Pressure
Propane, Low Pressure Propane or Natural Gas. The (3) burners are
assemble together by a brass manifold which each burner will have a
Needle Control Valve with an orifice to adjust the flame directly from the
burner individually, the brass manifold has a  3/8" Male Gas Flare Inlet.

This unit has a front handle to make it more compact and easy to carry,
also to protect the brass manifold during transport.

COMBO includes: 8" high 
WG3 folding Wind Guard, (2) 12" x 14"  WING
Side Table Extensions and a propane regulator assembly according to the
set up you chose high pressure or low pressure or a 5ft natural gas hose.
(COMBO setup saves almost $75.00 over buying all the items separately!)


● High Pressure Propane, with (3) HPCAST6 Burner (160,000 btu/hr).
   Includes a 
COM1 Regulator for a high pressure set up.

● Low Pressure Propane, with (3) LPCAST Burner (40,000 btu/hr).
   Includes
COM5 Regulator for a low pressure set up.

● Natural Gas, with (3) LPCAST Burner (40,000 btu/hr).
   Includes a 5' 
natural gas hoses for a natural gas set up.


Optional Accessories:


Check out our 
GRIDDLES and our BACON PRESS
Also the RING1 11" x 2" Wok Ring and RING2   9" x 3" Wok Ring.
And the 
7CSB3, Triple Burner Cooker Stand Heavy Duty Cover.


42"L x 17"W x 15"H, with the legs installed 42"L x 17"W x 30"H.
We offer free shipping to 48 U.S. States. Wt. 75#.

 

  • Triple Burner Cooker Stand COMBO
    CSB3H-COM Cooker Stand COMBO Includes WG3 Wind Guard, (2) Legs,
    (2) WING Side Table Extensions, and COM1 High Pressure Propane Regulator
  • Triple Burner Cooker Stand COMBO
    CSB3L-COM Cooker Stand Shown with Optional Small Griddle and Bacon Press
  • Triple Burner Cooker Stand COMBO
    Leg Storage Rack at the back side of the CSB3-COMBO

 

$439.95