COM1 -  10 PSI High Pressure PRESET Gas Regulator Assembly with a POL tank fitting and a 1/4"ID UL approved hose.

Appropriate for outdoor cooking appliances such as cookers or cast iron burners.  Buying Options are listed here:

►  Red Acme wrench-less safety tank connector is available at the top of          this page, at an additional charge. 

►  Stainless Steel protective hose overbraid is available as the 
     SS Hose purchase option at an additional charge. 
      (SS Hoses Not in Stock)

►  QDC - High Pressure Quick Disconnect Hose Combination Set is
     available as the QDC Hose Set or the Stainless Steel Overbraid
     Quick Disconnect hose as the QDC-SS Hose Set purchase Option.

We offer free shipping to 48 U.S. States. Wt. 2# (with a 5 ft hose).
 

CSB1-COM - Cooker Stand COMBO, Single Burner. For High Pressure,
Low Pressure or Natural Gas. Includes (4) Leg Extensions, Wind Guard,
(2) WINGS and Regulator Assembly or 5ft Natural Gas Hose.

This Cooker Stand has a cook top of 8 spokes the surface its 15" x 15"
and the height of 15". The CS1 its a dual height stand of 15" or 30".
Includes (4) removable legs that will provide the stand to be 30" in height.
It also comes with a burner of your choice for High Pressure Propane,
Low Pressure Propane or Natural Gas. In the burner there is a CVO125
(Control Valve Orifice) to adjust the flame directly from the burner.

COMBO includes: 8" high WG1 folding Wind Guard, (2) 12" x 14"  WING
Side Table Extensions and a propane regulator assembly according to the
set up you chose high pressure or low pressure or a 5ft natural gas hose.
(COMBO setup saves almost $23.00 over buying all the items separately!) 

● High Pressure Propane, with (1) HPCAST6 Burner (160,000 btu/hr).
   Includes a COM1 Regulator for a high pressure set up.

● Low Pressure Propane, with (1) LPCAST Burner (40,000 btu/hr).
   Includes a COM5 Regulator for a low pressure set up.

● Natural Gas, with (1) LPCAST Burner (40,000 btu/hr).
   Includes a 5' - 3/8"ID natural gas hoses  for a natural gas set up.


Optional Accessories:

Check out our Small GRIDDLES and our BACON PRESS.
Also the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
And the 7CSB1,, Single Burner Cooker Stand Heavy Duty Cover.


15"L x 15"W x 15"H, with the legs installed 15"L x 15"W x 30"H.
We offer free shipping to 48 U.S. States. Wt. 46#.

CSB1 - Cooker Stand Single Gas Burner Outdoor Picnic Cooking Stand Stove. For High Pressure, Low Pressure or Natural Gas. Includes (4) Leg Extensions.

This Cooker Stand has a cook top of 8 spokes the surface its 15" x 15"
and the height of 15". The CSB1 its a dual height stand of 15" or 30".
Includes (4) removable legs that will provide the stand to be 30" in height.
It also comes with a burner of your choice for High Pressure Propane,
Low Pressure Propane or Natural Gas. In the burner there is a CVO125
(Control Valve Orifice) to adjust the flame directly from the burner.

● High Pressure Propane, with (1) HPCAST6 Burner (160,000 btu/hr).
   We recommend our COM1 Regulator for a high pressure set up.

● Low Pressure Propane, with (1) LPCAST Burner (40,000 btu/hr).
   We recommend our COM5 Regulator for a low pressure set up.

● Natural Gas, with (1) LPCAST Burner (40,000 btu/hr).
   We recommend our natural gas hoses for a natural gas set up.


Optional Accessories:

The Optional WING side table extensions work well with this unit and the
Optional WG1, 8" high single burner folding Wind Guard is available.
Check out the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
Also the Small GRIDDLES and our BACON PRESS.
And the 7CSB1, Single Burner Cooker Stand Heavy Duty Cover.


15"L x 15"W x 15"H, with the legs installed 15"L x 15"W x 30"H.
We offer free shipping to 48 U.S. States. Wt. 27#.

 

CSB2 - Cooker Stand, Double Gas Burner Outdoor Cooking Stand Stove and Picnic Burner, Includes (4) Leg Extensions.

This Double Cooker Stand has a cook top surface of 28" x 14" with
8 spokes over each burner and the height of 15". The CSB2 its a dual
height stand of 15" or 30". Includes (4) removable legs that will provide
the stand to be 30" in height and with a leg storage rack at the rear end
of the unit. It also comes with burners of your choice for High Pressure
Propane, Low Pressure Propane or Natural Gas. The (2) burners are
assemble together by a brass manifold which each burner will have a
Needle Control Valve with an orifice to adjust the flame directly from the
burner individually, the brass manifold has a  3/8" Male Gas Flare Inlet.
This unit has a front handle to make it more compact and easy to carry,
also to protect the brass manifold during transport.

● High Pressure Propane, with (2) HPCAST6 Burners (160,000 btu/hr).
   We recommend our COM1 Regulator for a high pressure set up.

● Low Pressure Propane, with (2) LPCAST Burners (40,000 btu/hr).
   We recommend our COM5 Regulator for a low pressure set up.

● Natural Gas, with (2) LPCAST Burners (40,000 btu/hr).
   We recommend our natural gas hoses for a natural gas set up.


Optional Accessories:

The Optional WING side table extensions works well with this unit which
could be added to either or both ends. The use of (1) Optional WING
will increase the width of the unit to 40". And the use of (2) Optional Wings
will make the width 52". An Optional WG2, 8" high double burner folding
Wind Guard is available. Check out our Small or Medium Size
GRIDDLES which will be suitable for this unit and our BACON PRESS.
Also the RING1  11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
And the 7CSB2, Double Burner Cooker Stand Heavy Duty Cover.


28"L x 17"W x 15"H, with the legs installed 28"L x 17"W x 30"H.  
We offer free shipping to 48 U.S. States. Wt. 46#.
 

G-204077 - Acme Tank Fitting, Red Acme Type 1 Safety Connector is a wrench-less, user friendly, right hand connector with excess flow and a thermally sensitive sleeve for extra safety.   1 5/16" ACME x 1/4" M NPT.

► 400,000 btu/hr maximum output capacity. Well designed for the 0-60 psi
     high pressure propane gas regulator valves.

► If you order a Regulator and Acme fitting we will install it on the regulator
    you order, no extra charge.

► For installation it requires a 11/16" socket, preferably 6 point.

► Red Acme Inlet Tank Fitting Video   

We offer free shipping to 48 U.S. States. Wt.  2.7 oz. 

Pictured below, for example, is a Red ACME inlet fitting installed on a COM1 (10PSI) regulator assembly.
 

CSB2-COM - Cooker Stand COMBO, Double Burner. For High Pressure,
Low Pressure or Natural Gas. Includes (4) Leg Extensions, Wind Guard,
(2) WINGS and Regulator Assembly or 5ft Natural Gas Hose.

This Double Cooker Stand has a cook top surface of 28" x 14" with
8 spokes over each burner and the height of 15". The CSB2 its a dual
height stand of 15" or 30". Includes (4) removable legs that will provide
the stand to be 30" in height and with a leg storage rack at the rear end
of the unit. It also comes with burners of your choice for High Pressure
Propane, Low Pressure Propane or Natural Gas. The (2) burners are
assemble together by a brass manifold which each burner will have a
Needle Control Valve with an orifice to adjust the flame directly from the
burner individually, the brass manifold has a  3/8" Male Gas Flare Inlet.
This unit has a front handle to make it more compact and easy to carry,
also to protect the brass manifold during transport.

COMBO includes: 8" high WG2 folding Wind Guard, (2) 12" x 14"  WING
Side Table Extensions and a propane regulator assembly according to the
set up you chose high pressure or low pressure or a 5ft natural gas hose.
(COMBO setup saves almost $70.00 over buying all the items separately!)

● High Pressure Propane, with (2) HPCAST6 Burner (160,000 btu/hr).
   Includes a COM1 Regulator for a high pressure set up.

● Low Pressure Propane, with (2) LPCAST Burner (40,000 btu/hr).
   Includes a COM5 Regulator for a low pressure set up.

● Natural Gas, with (2) LPCAST Burner (40,000 btu/hr).
   Includes a 5' - 3/8"ID natural gas hoses for a natural gas set up.


Optional Accessories:

Check out our Small and Medium GRIDDLES and our BACON PRESS.
Also the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
And the 7CSB2, Double Burner Cooker Stand Heavy Duty Cover.


28"L x 17"W x 15"H, with the legs installed 28"L x 17"W x 30"H.
We offer free shipping to 48 U.S. States. Wt. 72#.
 

CSB3 - Cooker Stand, Triple Gas Burner Outdoor Camping Cooking Stand Stove, includes (4) leg extensions
 

This Triple Cooker Stand has a cook top surface of 42" x 14" with
8 spokes over each burner and the height of 15". The CSB3 its a dual
height stand of 15" or 30". Includes (4) removable legs that will provide
the stand to be 30" in height and with a leg storage rack at the rear end
of the unit. It also comes with burners of your choice for High Pressure
Propane, Low Pressure Propane or Natural Gas. The (3) burners are
assemble together by a brass manifold which each burner will have a
Needle Control Valve with an orifice to adjust the flame directly from the
burner individually, the brass manifold has a  3/8" Male Gas Flare Inlet.
This unit has a front handle to make it more compact and easy to carry,
also to protect the brass manifold during transport.

● High Pressure Propane, with (3) HPCAST6 Burners (160,000 btu/hr).
   We recommend our COM1 Regulator for a high pressure set up.

● Low Pressure Propane, with (3) LPCAST Burners (40,000 btu/hr).
   We recommend our COM5 Regulator for a low pressure set up.

● Natural Gas, with (3) LPCAST Burners (40,000 btu/hr).
   We recommend our natural gas hoses for a natural gas set up.


Optional Accessories:

The Optional WING side table extensions works well with this unit which
could be added to either or both ends. The use of (1) Optional WING
will increase the width of the unit to 54". And the use of (2) Optional Wings
will make the width 66". An Optional WG3, 8" high double burner folding
Wind Guard is available. Check out our Small, Medium or Large Size
GRIDDLES which will be suitable for this unit and our BACON PRESS.
Also the RING1 11" x 2" Wok Ring and RING2 9" x 3" Wok Ring.
And the 7CSB3, Triple Burner Cooker Stand Heavy Duty Cover.


42"L x 17"W x 15"H, with the legs installed 42"L x 17"W x 30"H.  
We offer free shipping to 48 U.S. States. Wt. 57#.


 

CSB3-COM - Cooker Stand COMBO, Triple Burner. For High Pressure,
Low Pressure or Natural Gas. Includes (4) Leg Extensions, Wind Guard,
(2) WINGS and Regulator Assembly or 5ft Natural Gas Hose.

This Triple Cooker Stand has a cook top surface of 42" x 14" with
8 spokes over each burner and the height of 15". The CS3 its a dual
height stand of 15" or 30". Includes (4) removable legs that will provide
the stand to be 30" in height and with a leg storage rack at the rear end
of the unit. It also comes with burners of your choice for High Pressure
Propane, Low Pressure Propane or Natural Gas. The (3) burners are
assemble together by a brass manifold which each burner will have a
Needle Control Valve with an orifice to adjust the flame directly from the
burner individually, the brass manifold has a  3/8" Male Gas Flare Inlet.
This unit has a front handle to make it more compact and easy to carry,
also to protect the brass manifold during transport.

COMBO includes: 8" high WG3 folding Wind Guard, (2) 12" x 14"  WING
Side Table Extensions and a propane regulator assembly according to the
set up you chose high pressure or low pressure or a 5ft natural gas hose.
(COMBO setup saves almost $75.00 over buying all the items separately!)

● High Pressure Propane, with (3) HPCAST6 Burner (160,000 btu/hr).
   Includes a COM1 Regulator for a high pressure set up.

● Low Pressure Propane, with (3) LPCAST Burner (40,000 btu/hr).
   Includes a COM5 Regulator for a low pressure set up.

● Natural Gas, with (3) LPCAST Burner (40,000 btu/hr).
   Includes a 5' natural gas hoses for a natural gas set up.


Optional Accessories:

Check out our GRIDDLES and our BACON PRESS
Also the RING1 11" x 2" Wok Ring and RING2   9" x 3" Wok Ring.
And the 7CSB3, Triple Burner Cooker Stand Heavy Duty Cover.


42"L x 17"W x 15"H, with the legs installed 42"L x 17"W x 30"H.
We offer free shipping to 48 U.S. States. Wt. 75#.
 

MWEED - 24", 36", 48" Magnum Head Propane Weed Burner, 500,000 btu/hr High Output Garden & Snow Melting Torch with adjustable handle and needle valve flame control

Why would I need a Magnum Head Weed Burner?

The Standard burner head is (2 1/2" x 2 1/2" head) and the Magnum burner head (3" x 3" head) weed burner.  The Magnum burner puts out 50% more flame and is preferred by many operators working on large scale weed removal, working with roofing tar, or working melting snow.  Some BBQ Cookers prefer the use of a Magnum Weed Burner to get their logs started. We recommend use of this unit with an optional COM1 High Pressure Regulator with Ten foot hose. (See it at the bottom of the page).

We offer free shipping to 48 U.S. States.