Home  >  Search Result >


Propane Regulator 101 Facts

Videos

 

Home  >  Search Result > Products

 

 

COMRI-60 - 0-60 PSI High Pressure ADJUSTABLE Propane Gas Regulator with Gauge    

  COMRI-60

COMRI-60 - 0-60 PSI High Pressure ADJUSTABLE Propane Gas Regulator with Pressure Gauge Assembly, includes a POL tank fitting, a PSI gauge and a 1/4"ID hose.    

Good for adjusting the gas flow to a repeatable setting. This COMRI-60 regulator will have a pressure gauge from 0-100 PSI. This pressure range will lower the chances of gauge damage when gas pressure instantly changes or "pings".  Pinging can damage the gauge mechanism and permanently render the future readings incorrect.  Options are listed here:

►  Red Acme wrench-less safety tank connector is available at the top of          this page, at an additional charge. 

►  Stainless Steel protective hose overbraid is available as the 
     SS Hose purchase option at an additional charge.
     (SS Hoses Not in Stock)

►  QDC - High Pressure Quick Disconnect Hose Combination Set is
     available as the QDC Hose Set or the Stainless Steel Overbraid
     Quick Disconnect hose as the QDC-SS Hose Set purchase Option.

We offer free shipping to the 48 U.S. States.  Wt. 3# (with a 5 ft hose).

 

$104.95

 
0-60 PSI High Pressure ADJUSTABLE Propane Gas Regulator with Gauge

 

COM2-60 - 0-60 PSI High Pressure ADJUSTABLE Gas Regulator    

  COM2-60

COM2-60 - (0-60 psi) High Pressure ADJUSTABLE Gas Regulator Assembly with a POL tank fitting and a 1/4"ID hose.    

Appropriate for outdoor cooking appliances such as cookers or cast iron burners when more propane gas flow is necessary than usual. 
Options are listed here:

►  Red Acme wrench-less safety tank connector is available at the top of          this page, at an additional charge. 

►  Stainless Steel protective hose overbraid is available as the 
     SS Hose purchase option at an additional charge.

►  QDC - High Pressure Quick Disconnect Hose Combination Set is
     available as the QDC Hose Set or the Stainless Steel Overbraid
     Quick Disconnect hose as the QDC-SS Hose Set purchase Option.

We offer free shipping to the 48 U.S. States.  Wt. 2# (with a 5 ft hose).

 

$89.95

 
0-60 PSI High Pressure ADJUSTABLE Gas Regulator

 

LPCAST10-2 - Adjustable Length Neck Cast Iron Low Pressure Propane or Natural Gas Two-Part Burner

  LPCAST10-2

LPCAST10-2 - 10" Diameter Burner Head w/ Adjustable Length Neck. Low Pressure Propane or Natural Gas Two-Part Burner (100,000 BTU/hr)

●  Designed for the burner head to be placed inside the burning area
    and the venturi to be placed on the outside of the system or away
    from the burning area, which the distance in between is
    determined by the length of a 1 1/4" black pipe nipple been used.
●  Venturi and Burner head have 1 1/4" Female Normal Pipe Threads.
●  The burner head has (4) 8mm mounting bolts to the sides of the burner.
●  The diameter of the burner head is 10" and the height is 5".
●  We recommend a distance of 2" from burner to the bottom of pot.


●  Provides a maximum output of 100,000 BTU/hr.
●  Includes a 90° 3/8" flare Orifice, air shutter, and Insect Screen Guard
    Or by request a 180° 3/8" flare orifice fitting is also available.
●  1 1/4" ID Pipe Nipple is NOT included. Pipe nipple must be at least 4".


Optional Accesories:

●  We recommend our Regulator COM5 for low pressure propane
●  We recommend our natural gas hoses for a natural gas set up.
●  The G-CVO Needle Control Valve Orifice.
●  Also our G-PILOT Assembly.

We offer free shipping to 48 U.S. States. Wt. 15#.
 

  • 100,000 Btu/hr Low Pressure Two Part Cast Iron Burner with Control Valve Orifice   100,000 Btu/hr Low Pressure Two Part Cast Iron Burner with Control Valve Orifice
    LPCAST10-2 with Optional CVO Needle Valve Orifice
  • 100,000 Btu/hr Low Pressure Two Part Cast Iron Burner with Adjustable Lenght Neck
    Bottom view of the LPCAST10-2
  • 100,000 Btu/hr Low Pressure Two Part Cast Iron Burner with Adjustable Lenght Neck
    LPCAST10-2

 

$249.95

 
10in Diameter Burner Head with Adjustable Length Neck Cast Iron Low Pressure Propane or Natural Gas Two-Part Burner

 

LPCAST8-2 - Adjustable Length Neck Cast Iron Low Pressure Propane or Natural Gas Two-Part Burner

  LPCAST8-2

LPCAST8-2 - 8" Diameter Burner Head - Adjustable Length Neck & Height Cast Iron Low Pressure Propane or Natural Gas Two-Part Burner. (80,000 BTU/hr). Home brewers love this versatile burner.

●  Designed for the burner head to be placed inside the burning area
    and the venturi to be placed on the outside of the system or away
    from the burning area, which the distance in between is
    determined by the length of a 1 1/4" black pipe nipple been used.
●  Venturi and Burner head have 1 1/4" Female Normal Pipe Threads.
●  The burner head has (4) 6mm mounting bolts to the sides of the burner.
●  The diameter of the burner head is 8" and the height is 6".
●  We recommend a distance of 2" from burner to the bottom of pot.


●  Provides a maximum output of 80,000 BTU/hr.
●  Includes a 90° 3/8" flare Orifice, air shutter, and Insect Screen Guard
    Or by request a 180° 3/8" flare orifice fitting is also available.
●  1 1/4" ID Pipe Nipple is NOT included. Pipe nipple must be at least 4".
●  This burner is our own design and is not available elsewhere.


Optional Accesories:

●  We recommend our Regulator COM5 for low pressure propane
●  We recommend our natural gas hoses for a natural gas set up.
●  The G-CVO Needle Control Valve Orifice.
●  Also our G-PILOT Assembly.


We offer free shipping to 48 U.S. States. Wt. 12#.

 

  • 80,000 Btu/hr Low Pressure Two Part Cast Iron Burner with Adjustable Lenght Neck
    LPCAST8-2 with standard 90º brass orifice
  • 80,000 Btu/hr Low Pressure Two Part Cast Iron Burner with Control Valve Orifice
    LPCAST8-2 with Optional CVO250
  • 80,000 Btu/hr Low Pressure Two Part Cast Iron Burner with Adjustable Lenght Neck   80,000 Btu/hr Low Pressure Two Part Cast Iron Burner with Adjustable Lenght Neck
    Bottom view of the LPCAST8-2
  • 80,000 Btu/hr Low Pressure Two Part Cast Iron Burner with Control Valve Orifice   80,000 Btu/hr Low Pressure Two Part Cast Iron Burner with Control Valve Orifice
    Novel design of LPCAST8-2 casting permits a pipe nipple of any length to enter from below

 

$199.95

 
8in Diameter Burner Head with Adjustable Length Neck Cast Iron Low Pressure Propane or Natural Gas Two-Part Burner

 

204RC077 - Red Acme Type 1 Wrench-less Safety Tank Connector with Excess Flow Protection

  204RC077

204RC077 - Red Acme Type 1 Wrench-less Safety Tank Connector with safety shut-off features of: (1) a thermally-sensitive sleeve which also will shut the gas off if it senses temperatures above 240°F and
(2) detecting excessive gas flow.

► 1 5/16" x 1/4" M NPT fitting size.

► Not for use on smaller gas grills and other low pressure devices.

► 400,000 btu/hr maximum output capacity.  Designed for the 0-60 psi
     series adjustable high pressure propane gas regulator valves.

► We will install it on the regulator you order. No installation charges.

► Installation requires use of an 11/16" socket, preferably 6 point. 

► Red Acme Inlet Tank Fitting Video  

We offer free shipping to 48 U.S. States. Wt.  2.7 oz. 
  
Pictured below, for example, is a Red Acme inlet fitting installed on COM1 (10 PSI) regulator assembly.

  • Red Acme Type 1 Wrench-less Safety Tank Connector with Excess Flow Protection
    Red Acme Safety Tank Fitting on
    High Pressure Regulator
  • Red Acme Type 1 Wrench-less Safety Tank Connector with Excess Flow Protection
    Red Acme-Regulator Side
  • Red Acme Type 1 Wrench-less Safety Tank Connector with Excess Flow Protection
    Red Acme-Tank Side

$12.00

 
Red Acme Type 1 Wrench-less Safety Tank Connector with Excess Flow Protection

 

WEED - 24", 36" and 48" Standard Head Propane Weed Burners  

  WEED

WEED - 24", 36" and 48" Lengths, Standard Head Propane Weed Burners with adjustable handles and needle valve flame fine adjustment

We have 3 different lengths of standard weed burners, 24", 36" and 48". It has a 3/8" Male Gas Flare inlet fitting, with a fine adjustment Needle Valve to control the flame. It also includes an adjustable handle. We recommend use of this unit with an optional COM1 High Pressure Regulator with Ten foot hose. (See it at the bottom of the page).

We offer free shipping to 48 U.S. States.

  • 24in, 36in and 48in Standard Head Propane Weed Burner
    24"          36"         48"
  • 24in, 36in and 48in Standard Head Propane Weed Burner
  • 24in Standard Head Propane Weed Burner

 

$74.95

 
24", 36" and 48" Standard Head Propane Weed Burners

 

MWEED - 24", 36" and 48" Magnum Head Propane Weed Burner, 500,000 btu/hr High Output Garden & Snow Melting Torch

  MWEED

MWEED - 24", 36", 48" Magnum Head Propane Weed Burner, 500,000 btu/hr High Output Garden & Snow Melting Torch with adjustable handle and needle valve flame control

Why would I need a Magnum Head Weed Burner?

The Standard burner head is (2 1/2" x 2 1/2" head) and the Magnum burner head (3" x 3" head) weed burner.  The Magnum burner puts out 50% more flame and is preferred by many operators working on large scale weed removal, working with roofing tar, or working melting snow.  Some BBQ Cookers prefer the use of a Magnum Weed Burner to get their logs started. We recommend use of this unit with an optional COM1 High Pressure Regulator with Ten foot hose. (See it at the bottom of the page).

We offer free shipping to 48 U.S. States.
 

  • 24in, 36in and 48in Magnum Head Propane Weed Burner
    24", 36", 48" Magnum Weed Burners
  • 24in Standard and 24in Magnum Weed Burners
    Magnum (Top) and Standard Weed Burners
  • 24in, 36in and 48in Standard Head and Magnum Head Propane Weed Burner
    Standard and Magnum Weed Burners
  • 24in, 36in and 48in Magnum Head Propane Weed Burner
    24", 36", 48" Magnum Weed Burners
  • 24in Standard and 24in Magnum Weed Burners Performance  
    Magnum and Standard Weed Burner Performance

 

$79.95

 
MWEED - 24", 36" and 48" Magnum Head Propane Weed Burner