:: Search Products ::

G-PILOT - Gas Needle Valve - Twin Gas Needle Valve Combo for fine control of Pilot and Burner NEW ITEM

G-PILOT

G-PILOT - Twin Gas Needle Valve Combo for fine control of G-Pilot and Burner

♦ Combo package has a twin gas needle valve fitting, 24" of aluminum
tubing, stainless steel pilot assembly, two stainless cable ties, and a
gas orifice fitting of your choice for the burner.

♦ Please leave your burner type in COMMENTS during Checkout of
Shopping Cart.

♦ Free shipping to the 48 U.S. States, wt. 12 oz. (entire assembly).

Combo package of twin gas needle valve components twin needle valve control installed on a LPCAST low pressure burner
Twin Gas Needle Valve Combo Components G-PILOT installed on a low pressure burner

G-PILOT on a hi pressure burner G-PILOT on two-part hi pressure burner

$79.95

Twin Needle Valve Control Fitting for fine control of Pilot and Burner

HPOCA4 - 4" Neck Cast Iron High Pressure Burner

HPOCA4

HPOCA4 - 4" Neck Cast Iron High Pressure Burner. (160,000 BTU/hr)

● The burner has a 6mm in diameter or a 1/4" Center Bolt.
● From the edge of the air inlet to the center bolt the burner is 5".
● From the orifice to the center bolt is 6".
● The total length of the burner with an orifice is 8".
● The diameter of the burner head is 4" and the height is 3".
● We recommend a distance of 3" to 4" from burner to the bottom of pot.

● Provides a maximum output of 160,000 BTU/hr.
● Includes a 90° 3/8" flare Orifice, air shutter, and Insect Screen Guard
Or by request a 180° 3/8" flare orifice fitting is also available.

Optional Accesories:

● We recommend our Regulator COM3.
● The G-CVO Needle Control Valve Orifice.
● Also our G-PILOT Assembly.

We offer free shipping to 48 U.S. States. Wt. 3#.13 oz.

HPOCA4 with Optional CVO Control Valve Orifice
- Bottom side view of the HPOCA4

$39.95

HPCAST6 - 6" Neck Cast Iron High Pressure Burner

HPCAST6

HPCAST6 - 6" Neck Cast Iron High Pressure Burner. (160,000 BTU/hr). Installed in most kettle corn machines.

● The burner has a 6mm in diameter or a 1/4" Center Bolt.
● From the edge of the air inlet to the center bolt the burner is 6 1/4".
● From the orifice to the center bolt is 7 1/2".
● The total length of the burner with an orifice is 10".
● The diameter of the burner head is 4" and the height is 3".
● We recommend a distance of 3" to 4" from burner to the bottom of pot.

● Provides a maximum output of 160,000 BTU/hr.
● Includes a 90° 3/8" flare Orifice, air shutter, and a Insect Screen Guard
Or by request a 180° 3/8" flare orifice fitting is also available.

Optional Accesories:

● We recommend our Regulator COM3.
● The G-CVO Needle Control Valve Orifice.
● Also our G-PILOT Assembly.

We offer free shipping to 48 U.S. States. Wt. 3#.8 oz.

HPCAST6 with Optional CVO Control Valve Orifice
Bottom side view of the HPCAST6
HPCAST6 with Optional G-PILOT Assembly

$59.95

PBM125 - 1 1/4" ID Pipe Burners and Venturi, (with Optional support Legs)

PBM125

PBM125 - 1 1/4" ID Pipe Burners and Venturi, (with Optional support Legs)

● Burners are for High Pressure, Low Pressure Propane or Natural Gas,
   include a 1 1/4" Female NPT venturi and a welded cap on the other end.
● We stock (4) different lengths of pipe burners 32", 44", 56" and 68" which
    are measured from the threads of the pipe burner to the opposite end.
● The burners are 1.25" ID (Inside Diameter) and 1.5" OD
    (Outside Diameter) with the thickness of a standard schedule 40 pipe.
● Our pipe burners are designed to be easily light and they are tested to
    give a blue even flame all across the length of the pipe burner.
● From the theads of the burner to the first drilled hole there is a space of
    8" that does not have any holes for flames this gap is been used as the
    "throat" that is required for the gas and air to mix efficiently in order to
     have a nice blue flame.
● To support the pipe burner we recommend a cradle out of a well
    supported length of angle iron, it will also help for easy an removal
    of the burner for cleaning.

We also have the Option of customized support LEGS which are 1/2" diameter round support legs with or without a flat bar which can be welded permanently to the bottom of the legs.

                                                           Weight    Weight with
                                     LEGS
● PBM125-32, has 32" of total length and 24" of flame     8#        10#
● PBM125-44, has 44" of total lenght and 36" of flame 10#      12#
● PBM125-56, has 56" of total lenght and 48" of flame 12#    15#
● PBM125-68, has 68" of total lenght and 60" of flame 15#    18#

Optional Accesories:

● We recommend our COM3 Regulator for a High Pressure set up.
● We recommend our Regulator COM5 for a Low Pressure set up.
    We recommend our natural gas hoses for a Natural Gas set up.
● The G-CVO Needle Control Valve Orifice.
● Also our G-PILOT Assembly.

● Pipe Burner Video

Pipe Burners are made out of Schedule 40 Black Pipe (Carbon Steel Pipe)

For custom length Stainless Steel pipe burners call for a quote. 713.222.6095

We offer free shipping to 48 U.S. States.

68" Pipe Burner with 1 1/4" FNPT Venturi and Optional CVO Control Valve Orifice (Needle Valve)
32" Pipe Burner with Optional Support Legs
Pipe Burner with Optional G-PILOT Assembly

$299.95

PBMG125 - 1 1/4" ID Pipe Burners with Venturi and Grease Shield (Optional support Legs)

PBMG125

PBMG125 - 1 1/4" ID Pipe Burners with Venturi and Grease Shield
(Optional support Legs)

● Burners are for High Pressure, Low Pressure Propane or Natural Gas,
   include a 1 1/4" Female NPT venturi and a welded cap on the other end.
● We stock (4) different lengths of pipe burners 32", 44", 56" and 68" which
    are measured from the threads of the pipe burner to the opposite end.
● The burners are 1.25" ID (Inside Diameter) and 1.5" OD
    (Outside Diameter) with the thickness of a standard schedule 40 pipe.
● Our pipe burners are designed to be easily light and they are tested to
    give a blue even flame all across the length of the pipe burner.
● From the theads of the burner to the first drilled hole there is a space of
    8" that does not have any holes for flames this gap is been used as the
    "throat" that is required for the gas and air to mix efficiently in order to
     have a nice blue flame.
● To support the pipe burner we recommend a cradle out of a well
    supported length of angle iron, it will also help for easy an removal
    of the burner for cleaning.

We also have the Option of customizing support LEGS which are 1/2" diameter round support legs with or without a flat bar which can be welded permanently to the bottom of the legs.

                                                           Weight    Weight with
                                         GS & LEGS
● PBM125-32, has 32" of total length and 24" of flame 12#          14#
● PBM125-44, has 44" of total lenght and 36" of flame 16#      18#
● PBM125-56, has 56" of total lenght and 48" of flame 20#    22#
● PBM125-68, has 68" of total lenght and 60" of flame 24#    26#

Optional Accesories:

● We recommend our COM3 Regulator for a High Pressure set up.
● We recommend our Regulator COM5 for a Low Pressure set up.
    We recommend our natural gas hoses for a Natural Gas set up.
● The G-CVO Needle Control Valve Orifice.
● Also our G-PILOT Assembly.

● Pipe Burner Video

Pipe Burners are made out of
Schedule 40 Black Pipe
(Carbon Steel Pipe)

For custom length Stainless Steel pipe burners call for a quote. 713.222.6095

We offer free shipping to 48 U.S. States.

32" Pipe Burner with Grease Shield and Optional Support Legs

Pipe Burner with Optional G-PILOT Assembly

$349.95

1 1/4in ID Pipe Burners with Venturi and Grease Shield (Optional support Legs)

LPCAST10-2 - Adjustable Length Neck Cast Iron Low Pressure Propane or Natural Gas Two-Part Burner

LPCAST10-2

LPCAST10-2 - 10" Diameter Burner Head w/ Adjustable Length Neck. Low Pressure Propane or Natural Gas Two-Part Burner (100,000 BTU/hr)

● Designed for the burner head to be placed inside the burning area
and the venturi to be placed on the outside of the system or away
from the burning area, which the distance in between is
determined by the length of a 1 1/4" black pipe nipple been used.
● Venturi and Burner head have 1 1/4" Female Normal Pipe Threads.
● The burner head has (4) 8mm mounting bolts to the sides of the burner.
● The diameter of the burner head is 10" and the height is 5".
● We recommend a distance of 2" from burner to the bottom of pot.

● Provides a maximum output of 100,000 BTU/hr.
● Includes a 90° 3/8" flare Orifice, air shutter, and Insect Screen Guard
Or by request a 180° 3/8" flare orifice fitting is also available.
● 1 1/4" ID Pipe Nipple is NOT included. Pipe nipple must be at least 4".

Optional Accesories:

● We recommend our Regulator COM5 for low pressure propane
● We recommend our natural gas hoses for a natural gas set up.
● The G-CVO Needle Control Valve Orifice.
● Also our G-PILOT Assembly.

We offer free shipping to 48 U.S. States. Wt. 15#.

LPCAST10-2 with Optional CVO Needle Valve Orifice
Bottom view of the LPCAST10-2
LPCAST10-2

$249.95

10in Diameter Burner Head with Adjustable Length Neck Cast Iron Low Pressure Propane or Natural Gas Two-Part Burner

LPCAST8-2 - Adjustable Length Neck Cast Iron Low Pressure Propane or Natural Gas Two-Part Burner

LPCAST8-2

LPCAST8-2 - 8" Diameter Burner Head - Adjustable Length Neck & Height Cast Iron Low Pressure Propane or Natural Gas Two-Part Burner. (80,000 BTU/hr). Home brewers love this versatile burner.

● Designed for the burner head to be placed inside the burning area
and the venturi to be placed on the outside of the system or away
from the burning area, which the distance in between is
determined by the length of a 1 1/4" black pipe nipple been used.
● Venturi and Burner head have 1 1/4" Female Normal Pipe Threads.
● The burner head has (4) 6mm mounting bolts to the sides of the burner.
● The diameter of the burner head is 8" and the height is 6".
● We recommend a distance of 2" from burner to the bottom of pot.

● Provides a maximum output of 80,000 BTU/hr.
● Includes a 90° 3/8" flare Orifice, air shutter, and Insect Screen Guard
Or by request a 180° 3/8" flare orifice fitting is also available.
● 1 1/4" ID Pipe Nipple is NOT included. Pipe nipple must be at least 4".
● This burner is our own design and is not available elsewhere.

Optional Accesories:

● We recommend our Regulator COM5 for low pressure propane
● We recommend our natural gas hoses for a natural gas set up.
● The G-CVO Needle Control Valve Orifice.
● Also our G-PILOT Assembly.

We offer free shipping to 48 U.S. States. Wt. 12#.

LPCAST8-2 with standard 90º brass orifice
LPCAST8-2 with Optional CVO250
Bottom view of the LPCAST8-2
Novel design of LPCAST8-2 casting permits a pipe nipple of any length to enter from below

$199.95

8in Diameter Burner Head with Adjustable Length Neck Cast Iron Low Pressure Propane or Natural Gas Two-Part Burner

LPCAST10 - 10" Neck Cast Iron Low Pressure Propane or Natural Gas Burner

LPCAST10

LPCAST10 - 10" Diameter Burner Head with 10" Neck Cast Iron
Low Pressure Propane or Natural Gas Burner. (100,000 BTU/hr)

● The burner head has (4) 8mm mounting bolts to the sides of the burner.
● From the edge of the air inlet to the center of the burner is 10".
● From the orifice to the center of the burner is 11".
● The total length of the burner with an orifice is 17".
● The diameter of the burner head is 10" and the height is 5".
● We recommend a distance of 2" from burner to the bottom of pot.

● Provides a maximum output of 100,000 BTU/hr
● Proprietary cast mold designed for consistent high performance.
● Includes a 90° 3/8" flare Orifice, air shutter, and Insect Screen Guard
Or by request a 180° 3/8" flare orifice fitting is also available.

Optional Accesories:

● We recommend our Regulator COM5 for low pressure propane
● We recommend our natural gas hoses for a natural gas set up.
● The G-CVO Needle Control Valve Orifice.
● Also our G-PILOT Assembly.

We offer free shipping to 48 U.S. States. Wt. 14#.

LPCAST10 with Optional CVO Needle Valve Orifice
Bottom view of the LPCAST10

$149.95

10in Diameter Burner Head with 10in Neck Cast Iron Low Pressure Propane or Natural Gas Burner

PILOT - Burner Pilot Assembly

PILOT

PILOT - Burner Pilot Assembly

● Intended for use with any burner. G-PILOT dual valve also available.
● We have 1/4", 3/8", 1/2", 3/4", 1 1/4" Female NPT, in stock.
● Assembled with a 3/8" Male Gas Flare as the gas inlet, a tee,then
   a needle or ball valve to to control the gas for the burner, on the right
   side it has a small 1/4" ID brass pipe which connects to a 90° Elbow
   followed by a needle valve to control the gas of the Pilot Head.
   At the end there is a 24" aluminium pilot tubing with a pilot head install.

We offer free shipping to 48 U.S. States. Wt. 2#.

1/4" Pilot Light Assembly
3/8" Pilot Light Assembly
1/2" Pilot Light Assembly
3/4" Pilot Light Assembly
1 1/4" Pilot Light Assembly

$99.95

A125AM - 1 1/4" Cast Aluminum Venturi Gas and Air Mixer

A125AM

A125AM - 1 1/4" Cast Aluminum MONSTER Venturi Gs and Air Mixer.

- Aluminum Casting Made in Houston, Texas. Made-in-U.S.A.

- It has a 1 1/4" Female Normal Pipe Thread Outlet.

- No Rust, Light Weight and No Paint Needed.

- To be used with High Pressure / Low Pressure Propane or
Natural Gas.

- The flat top surface is 4" in Diameter by 2 1/2" in height.
- The height of the venturi with an orifice is approximately 4".

- Includes an Aluminum Air Shutter, Insect Screen Guard and a
90 3/8" Flare Orifice, with #61 Orifice for High Pressure Propane.

- Alternatively, a 180 3/8" Flare Orifice fitting is also available.
- Drilled to custom orifice size depending on your specified fuel and
length of pipe burner or specified burner at No Extra Charge.

(For alternative orifice or custom drilled orifice please let us know the
information in comment box section when added to shopping cart).

For High Pressure use we recommend the COM3 regulator/hose.

For Low Pressure use we recommend the COM5 regulator/hose.

The Optional CVO Needle Control Valve with Orifice.

Also available with a G-Pilot Assembly.

Weight 1#. Free Shipping within the 48 contiguous U.S. States.

$149.95

A125AM - 1 1/4" Cast Aluminum Venturi Gas and Air Mixer